ausmini
https://www.ausmini.com/forums/

Questions on panel and paint.
https://www.ausmini.com/forums/viewtopic.php?f=2&t=41129		 Page 1 of 2
Author:  stuart17 [ Wed Apr 16, 2008 7:18 pm ]
Post subject:  Questions on panel and paint.
Hi my name is stuart, I have followed the forum for a while now.My background is in the panel and paint industry. I have been a spray painter for 24 years and had my own shop for about 17.I have also been a manager for a major paint company. If any one has any questions or needs any advice on any body work or paint , just send me a message as im glad to try and help. I usually read the forum each night.
Author:  lilmatti_69 [ Wed Apr 16, 2008 7:40 pm ]
Post subject: 
Hi you seem to know alot about painting, can you give me tips on this topic please.


Cheers

http://www.ausmini.com/forums/viewtopic.php?t=41050&postdays=0&postorder=asc&start=0
Author:  gerg [ Wed Apr 16, 2008 7:45 pm ]
Post subject: 
Hi Stuart, and welcome to the forum mate. I'm sure you'll get enough questions to last you.... :D , and BTW thanks in advance.

cheers Gerg
Author:  gafmo [ Wed Apr 16, 2008 8:03 pm ]
Post subject: 
Ow Stuart what have you done..Your PM or MSN is going to be full each night and want have time to ready any of our threads.
Welcome or should I say G'day final to the Mad Mini Den.
Why arn't you in Sydney :twisted:
We should really have a Panel and Paint section :idea:
Author:  justminis [ Wed Apr 16, 2008 8:10 pm ]
Post subject: 
Welcome Stuart, great to have you on board. Do you have a mini? Brad (Hanra) and I both from Cairns frequent here too. We try to organise a mini run now and then if you are interested. Steve
Author:  stuart17 [ Wed Apr 16, 2008 9:07 pm ]
Post subject: 
hi steve , i have 2 minis ,1 clubman ,1 about a 64. both being repaird .
also im doing an early van resto for a client, coffee and a chat is always welcome at my workshop.
Author:  gafmo [ Wed Apr 16, 2008 9:36 pm ]
Post subject: 
Nice 8)
Author:  justincase42 [ Thu Apr 17, 2008 6:15 am ]
Post subject: 
I think I might have to move to cairns!
Author:  justminis [ Thu Apr 17, 2008 7:16 am ]
Post subject: 
Good one Stuart. Great to see another local mini fan. Will be in touch for that chat and coffee. Steve
Author:  Hanra [ Thu Apr 17, 2008 10:16 am ]
Post subject: 
Whats the name of your shop mate?
Author:  Archangel007 [ Thu Apr 17, 2008 11:22 am ]
Post subject: 
Well I now know what to do with my spare time when I am next in Cairns (Thursday 8th of May btw Steve :wink: )

Cheers,
Tricky
Author:  stuart17 [ Thu Apr 17, 2008 5:51 pm ]
Post subject: 
This name of my shop is Stuart Ward auto refinishing.
Hanra, did you ever pitcrew at speedway years ago?
Author:  Hanra [ Thu Apr 17, 2008 6:18 pm ]
Post subject: 
Ok, cant say Ive heard of ya. Where abouts are you located? PM me if you like.

No, but I did frequent the speedway back in 97-98. My car would of been there getting covered in dust then the dust turning to mud as the dew settled on it. It would of looked the same as it does now.
Author:  grey 64 [ Thu Apr 17, 2008 6:25 pm ]
Post subject: 
Hi Stuart, One of my cars has had a decal applied to the roof and then has been painted over :evil: i want to strip it, what do you suggest would be the best way? thanks Anthony.
Author:  stuart17 [ Thu Apr 17, 2008 6:47 pm ]
Post subject: 
Hi Anthony, Im a big fan of soda blasting, It leaves the steel perfect for repainting.It is not abrasive like garnet.and will not distort the panel.
also cost effective compared to sanding , and not as messy as stripper.
should be one in your area . you will find them under abrasive blasting in the yellow pages. i dont think you will be dissapointed at the results.
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/