| ausmini https://www.ausmini.com/forums/ |
|
| Pictures Needed: Twin Circ. Brake MC https://www.ausmini.com/forums/viewtopic.php?f=2&t=41178 |
Page 1 of 1 |
| Author: | rampage101 [ Fri Apr 18, 2008 7:30 am ] |
| Post subject: | Pictures Needed: Twin Circ. Brake MC |
I've just rebuilt a clutch MC and when I went to fit it to the car, it won't fit next to the brake MC. The one I rebuilt is the standard plastic res late model clubman type. Is there something I'm missing? |
|
| Author: | rampage101 [ Fri Apr 18, 2008 4:18 pm ] |
| Post subject: | |
Anyone? |
|
| Author: | brickworx [ Fri Apr 18, 2008 4:28 pm ] |
| Post subject: | |
It won't fit |
|
| Author: | rampage101 [ Fri Apr 18, 2008 5:13 pm ] |
| Post subject: | |
Well what clutch MC will fit with it? |
|
| Author: | brickworx [ Fri Apr 18, 2008 5:31 pm ] |
| Post subject: | |
All tandem master cylinder minis used a tin type clutch master. same as morris ones, or get a late rover one as they are in better nick |
|
| Author: | rampage101 [ Fri Apr 18, 2008 7:43 pm ] |
| Post subject: | |
Yeh, I had a tin type to reco, but it was too pitted in the bore. I'll check my other spare tin one and see what else I've got. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|