| ausmini https://www.ausmini.com/forums/ |
|
| mini moke export tank?? https://www.ausmini.com/forums/viewtopic.php?f=2&t=41237 |
Page 1 of 1 |
| Author: | yeehaa [ Sat Apr 19, 2008 8:02 pm ] |
| Post subject: | mini moke export tank?? |
i was wondering how hard it is to get hold of a mini moke export tank?? how do you conect it up to van for a second tank??? cheers damian |
|
| Author: | bnicho [ Sat Apr 19, 2008 9:01 pm ] |
| Post subject: | |
Very hard to get hold of! I had one, intended as a second tank for my Moke. I sold it a few months back on the Moke forum. It went very quickly. Apparently it's the same as an Austin-Healey Sprite, so you may have more luck finding one that way. As to fitting to a van, I don't know of anyone who has actually done it yet, but it looks easy enough. |
|
| Author: | justminis [ Sun Apr 20, 2008 8:49 am ] |
| Post subject: | |
As an alternative to the export Moke/Austin Health Sprite tank, a Morris Minor/1000 fuel tank could be used. I fitted a Minor tank to an export Moke in the mid 80's as the original tank was rotten. Length wise Minor tank is good, but a little narrower. A strip from the tank to the body was all that was required to mount. Had to also muck about with the fuel filler as it is on the opposite side. A bit of exhaust pipe bent up did the trick. This shouldn't be a problem if intended as second tank for a van. |
|
| Author: | moemoke [ Sun Apr 20, 2008 10:26 pm ] |
| Post subject: | |
Lucky - theres one on ebay at the moment, $231 with 5 days to finish, could get really expensive. http://cgi.ebay.com.au/Mini-Moke-EXPORT ... dZViewItem |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|