Fitting the webber in would be hard IMO
| ausmini https://www.ausmini.com/forums/ |
|
| sc12 kit https://www.ausmini.com/forums/viewtopic.php?f=2&t=41720 |
Page 1 of 2 |
| Author: | monkey [ Mon May 05, 2008 6:49 pm ] |
| Post subject: | sc12 kit |
Has any fitted a webber or similar to the sc12 kit that Ben makes?? pics of the set up would be great! cheers james |
|
| Author: | Kennomini [ Mon May 05, 2008 6:52 pm ] |
| Post subject: | |
Fitting the webber in would be hard IMO
|
|
| Author: | monkey [ Mon May 05, 2008 7:18 pm ] |
| Post subject: | |
i think i have seen a pic of one somewhere along the line.. wouldn't it just involve a new manifold? so that the carbie sits over the flywheel area? well thats what i have in my head
but have herd of hesitation problems. |
|
| Author: | Kennomini [ Mon May 05, 2008 7:44 pm ] |
| Post subject: | |
Thats what I was thinking, the A/F mix would take a fair while to reach the cylinders. |
|
| Author: | slo_firo [ Tue May 06, 2008 5:55 am ] |
| Post subject: | |
i have seen pics of VMAX setups from the uk with one, also their su manifold is alot longer and closer to the grill than bens kit.... i actually looked into getting one of the Vmax kits sent over before i found bens kit |
|
| Author: | minifreak1 [ Tue May 06, 2008 10:46 am ] |
| Post subject: | |
link fit a webber to there kit.... 
very fidaley though..but the sound of the super charger and webber is mad.... not good to road use i think was there coments also... |
|
| Author: | wyan [ Tue May 06, 2008 5:59 pm ] |
| Post subject: | |
Can I ask how much bens kit is? Cheers |
|
| Author: | sociallydisabled [ Tue May 06, 2008 6:08 pm ] |
| Post subject: | |
i am also curious about how much this kit costs |
|
| Author: | monkey [ Tue May 06, 2008 6:36 pm ] |
| Post subject: | |
cool thanks for the pic minifreak! the kit is 850 + postage and from what ive herd is deffinently worth it if your going in that direction 
|
|
| Author: | Spaceboy [ Tue May 06, 2008 6:41 pm ] |
| Post subject: | |
http://en.wiktionary.org/wiki/herd i think hesitation (lag) issues are due to the SU piston. no idea how a weber would cope... |
|
| Author: | Caponix [ Tue May 06, 2008 8:04 pm ] |
| Post subject: | |
minifreak1 wrote: link fit a webber to there kit....
very fidaley though..but the sound of the super charger and webber is mad.... not good to road use i think was there coments also... there would be very constricted airflow from that setup. just look at how many bends the mixture has to go through! |
|
| Author: | Morris 1100 [ Tue May 06, 2008 8:12 pm ] |
| Post subject: | |
Caponix wrote: minifreak1 wrote: link fit a webber to there kit.... very fidaley though..but the sound of the super charger and webber is mad.... not good to road use i think was there coments also... there would be very constricted airflow from that setup. just look at how many bends the mixture has to go through! 
|
|
| Author: | Ziegech [ Tue May 06, 2008 9:02 pm ] |
| Post subject: | |
more pipe could give u more issues with icing possibly? |
|
| Author: | wyan [ Wed May 07, 2008 7:56 pm ] |
| Post subject: | |
Can anybody please give me bens id.. I remember seeing it, but was a while ago! cheers |
|
| Author: | Caponix [ Wed May 07, 2008 8:14 pm ] |
| Post subject: | |
im pretty sure its 92 |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|