Thanks mate
Im a real newbie here, where is the carb inlet inlet pipe, would i need another hose... ? to connect them...
Sorry i but i will need a step by step here
Chris
| ausmini https://www.ausmini.com/forums/ |
|
| Fuel Hose ???? need help https://www.ausmini.com/forums/viewtopic.php?f=2&t=4220 |
Page 1 of 1 |
| Author: | mini-kris [ Sat Jan 22, 2005 11:16 am ] |
| Post subject: | Fuel Hose ???? need help |
Hi all Need help with this, fuel leaking, but dont know what this hose leads to, been 1 year i think, so i just blocked it. http://www.freewebs.com/seefuh/P1220004.JPG <-- sorry didnt mark it, but its the hose in the middle of the photo, with 2 lock wires http://www.freewebs.com/seefuh/P1220006.JPG <-- close up Thanks Chris |
|
| Author: | 13secmini [ Sat Jan 22, 2005 11:28 am ] |
| Post subject: | |
that hose is coming out of your fuel pump and needs to goto the carb inlet pipe. Its in the pic aswell. |
|
| Author: | mini-kris [ Sat Jan 22, 2005 11:34 am ] |
| Post subject: | |
Thanks mate Im a real newbie here, where is the carb inlet inlet pipe, would i need another hose... ? to connect them... Sorry i but i will need a step by step here
Chris |
|
| Author: | 13secmini [ Sat Jan 22, 2005 11:43 am ] |
| Post subject: | |
i think this is where it is suppose to go. Someone with an a series engine will have to confirm it 
|
|
| Author: | poeee [ Sat Jan 22, 2005 11:51 am ] |
| Post subject: | |
Yep, thats right, if the other end of the fuel pump goes to the tank! Could be running an electric pump, but the carby isn't getting any fuel at all, so maybe not. Your engine wouldn't have run (no fuel!!). |
|
| Author: | mini-kris [ Sat Jan 22, 2005 12:01 pm ] |
| Post subject: | |
What size hose is this, just to make sure before i go to supercheap |
|
| Author: | 9YaTaH [ Sat Jan 22, 2005 12:05 pm ] |
| Post subject: | Sample |
mini-kris wrote: What size hose is this, just to make sure before i go to supercheap
Take the little bit that's clamped on to the fuel pump along with you as a sample.... |
|
| Author: | mini-kris [ Sat Jan 22, 2005 2:16 pm ] |
| Post subject: | |
Wow It started. Not sure about wich tubes, tried both, should i block the other. Thanks for all the help guys, I will be here more often. Chris |
|
| Author: | 1380 yellow devil [ Sat Jan 22, 2005 2:19 pm ] |
| Post subject: | |
Mate there is always soem around to help u out I was soo slow to help u on ths one. |
|
| Author: | poeee [ Sat Jan 22, 2005 2:22 pm ] |
| Post subject: | |
It should be in the one 13sec drew the line into. The other one is an overflow and shouldn't be blocked. |
|
| Author: | min13k [ Sat Jan 22, 2005 3:05 pm ] |
| Post subject: | |
chris were in sydney are you ?? need help call me i work for jd and can even come with my own tool box makka 0412 938 072 hmmmmmm i gotta start working on my own cars soon might have to bye a case of beer anyone wanna help me drink it
makka |
|
| Author: | drmini in aust [ Sat Jan 22, 2005 3:19 pm ] |
| Post subject: | |
min13k wrote: hmmmmmm i gotta start working on my own cars soon might have to bye a case of beer anyone wanna help me drink it
makka How's that motor coming along, Makka? 
|
|
| Author: | gafmo [ Sat Jan 22, 2005 4:51 pm ] |
| Post subject: | |
 I cant get the bloody time chain bolt off
|
|
| Author: | min13k [ Sat Jan 22, 2005 5:39 pm ] |
| Post subject: | |
put the car in first foot on brake oh er is the motor in the car ????? makka |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|