| ausmini https://www.ausmini.com/forums/ |
|
| brake master cylinder https://www.ausmini.com/forums/viewtopic.php?f=2&t=42535 |
Page 1 of 1 |
| Author: | Goldbrocade_62 [ Fri May 30, 2008 8:48 pm ] |
| Post subject: | brake master cylinder |
Would a 76 clubby have a single or dual circuit master cylinder |
|
| Author: | Morris 1100 [ Fri May 30, 2008 8:53 pm ] |
| Post subject: | |
From memory it would have a single circuit. I think the changeover was mid 77. (the 76 that I have here is a single circuit) If it has no cylinder check the size of the hole in the bulkhead that the cylinder fits into. The dual cylinder has a bigger hole. The dual cylinder cars will also have the brake failure light on the top dash pad. (as well as the handbrake light) |
|
| Author: | d1ck0 [ Fri May 30, 2008 10:25 pm ] |
| Post subject: | |
My 76 has a dual. They must have changed over sometime during the year. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|