http://cgi.ebay.com.au/Leyland-Mini-con ... dZViewItem
It's a little bit different . Seller does have a single Mamba wheel though for those chasing one .
| ausmini https://www.ausmini.com/forums/ |
|
| Clubman + M 1100 hubs +Ford rear wheels - roof = ??? https://www.ausmini.com/forums/viewtopic.php?f=2&t=42542 |
Page 1 of 1 |
| Author: | sports850 [ Fri May 30, 2008 11:04 pm ] |
| Post subject: | Clubman + M 1100 hubs +Ford rear wheels - roof = ??? |
http://cgi.ebay.com.au/Leyland-Mini-con ... dZViewItem It's a little bit different . Seller does have a single Mamba wheel though for those chasing one .
|
|
| Author: | Kennomini [ Fri May 30, 2008 11:15 pm ] |
| Post subject: | |
Saw that. Looks awesome but would be a world better if it was rear wheel drive and had a good floor. Looks tough 
|
|
| Author: | minsta [ Sat May 31, 2008 10:04 am ] |
| Post subject: | conv |
Hiya! Tis mine! Sure is a strange beast - I only bought for the engine a few months ago, but have decided not to bother with it now as project ideas have changed. The rollcage is massive and the floors have been super strengthened. No idea what the PO was thinking about with the rear wheels though! 
I have a K van (two actually) which was to be the new owner of the engine - it runs well, no smoke and good compression - but the other van has its original engine, so I will concentrate on that instead. The second van will probably be for sale soon! I bought two mambas, but only need one for a spare, so am selling the extra one. cheers! jon |
|
| Author: | TUCK3r [ Sat May 31, 2008 12:50 pm ] |
| Post subject: | |
hahahahha that looks mean TUCK3R |
|
| Author: | sports850 [ Sun Jun 01, 2008 11:51 am ] |
| Post subject: | |
It's certainly different , someones put the work into it . How are the morris 1100 discs fitted and what's the steering geometry like ? |
|
| Author: | minsta [ Sun Jun 01, 2008 11:58 am ] |
| Post subject: | 1100 |
hiya! I haven't really looked that close to be honest, but the wheels are Morris 1100 and the stud pattern is 4.5 inch PCD. The PO seems to have fabricated a mounting (the passenger side one is not on the hub at present as it is still in the car) for the Morris calipers to fit the mini hubs. Imagine will work well if fitted up. Not sure about geometry, but looks straight! 
cheers! jon |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|