ausmini https://www.ausmini.com/forums/ |
|
Headlight installation - I need help! https://www.ausmini.com/forums/viewtopic.php?f=2&t=42600 |
Page 1 of 1 |
Author: | lilmatti_69 [ Sun Jun 01, 2008 11:52 pm ] |
Post subject: | |
Hi i don't think the looseness is due to installation, thats how i put mine on with only 2 screws and and doesn't wobble, i used the spring however, i think it holds the base to the black pod thingy, if that makes sense ![]() |
Author: | Trixitrine [ Mon Jun 02, 2008 12:05 am ] |
Post subject: | |
the spring may be the key here... you got any more info about how and where to attach the spring and connect it to what and where?? It says nothing about this in the manuals I have.... Thanx |
Author: | lilmatti_69 [ Mon Jun 02, 2008 12:12 am ] |
Post subject: | |
The spring connects to the pod on a bottom right tab, and the the bottom right on the base, there should be a hole for it. Is the whole base loose or only the headlight? If the whole base is loose then its most probably the spring. |
Author: | Trixitrine [ Mon Jun 02, 2008 9:27 am ] |
Post subject: | |
both are loose.... the base and the headlight... thanx for your help I will try that |
Author: | BALLISTIC [ Mon Jun 02, 2008 10:45 am ] |
Post subject: | |
In the body there should be a couple of plastic inserts then the rubber gasket and the base screws into the plastic insertswhich go into the body. The insersts should be a white coulour and rectangular box shape with a lip at one end and have a hole at the same end. The screws ( ![]() |
Author: | BALLISTIC [ Mon Jun 02, 2008 10:47 am ] |
Post subject: | |
Oh and the headlight should be a firm fit in the outterchrome ring when fitted .....best check your old headlights for any differences. |
Author: | Trixitrine [ Tue Jun 03, 2008 1:23 pm ] |
Post subject: | |
Hmmm I will have a scout around for those plastic things - I think I know what your talkin bout.... I just had a problem with the outer ring that its tabs that the screws go into just didnt line up with any of the holes in the body not even close! so I have spent a fair amount of time turning and flipping and turning and tearing my hair out trying to figure out how the hell to attach these things therefore I came up with the theory that it only attached to itself and not the body........ And hmm about the headlights - they appear identical to the old ones.... Hope they are the right ones...... |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |