| ausmini https://www.ausmini.com/forums/ |
|
| Wanted - tyre placard photo https://www.ausmini.com/forums/viewtopic.php?f=2&t=42755 |
Page 1 of 1 |
| Author: | Tspeed Jem [ Sat Jun 07, 2008 4:21 pm ] |
| Post subject: | Wanted - tyre placard photo |
I'm hoping that someone with a clubman (after 1/74) would be willing to take a photo of their tyre placard for me (recomended tyre pressures etc...) Rego want one fitted to my Jem (to comply with the ADR that came in from 1974). So if I can get a photo of one that is somewhat relevant to the vehicle and make up a sticker - they will be happy. Many thanks 
|
|
| Author: | minidrifter [ Sat Jun 07, 2008 4:23 pm ] |
| Post subject: | |
how long can it wait? i'll be back out at my mums tuesday night and i'll put up a pic then if no-one else has before hand. |
|
| Author: | jess [ Sat Jun 07, 2008 4:58 pm ] |
| Post subject: | |
what exactly is a tyre placard/where is it located? i have a 1976 mini s clubbie and i can take a photo of the page in my official Mini workshop manual that states tyre pressure if that is any use to you |
|
| Author: | EST-071 [ Sat Jun 07, 2008 5:11 pm ] |
| Post subject: | |
This is what Steve at Brickworx put on a Rover that I bought. All it is, is laminated paper and was stuck on to the mini near the battery in the boot. It passed blue slip in NSW like that in April this year.
Cheers Pete |
|
| Author: | chopchop [ Sat Jun 07, 2008 6:20 pm ] |
| Post subject: | |
Heres a sticker i made up for a 77 sunshine clubby. yours to copy or i can send it to you for $10. 
|
|
| Author: | 9YaTaH [ Sat Jun 07, 2008 6:58 pm ] |
| Post subject: | RTA |
Syd the point is...did Jems come out with them stickered on/affixed anywhere originally 
If not, politely explain that to the Nazis
|
|
| Author: | Austin850 [ Sat Jun 07, 2008 7:37 pm ] |
| Post subject: | Re: RTA |
9YaTaH wrote: Syd the point is...did Jems come out with them stickered on/affixed anywhere originally
If not, politely explain that to the Nazis For better or worse, it's being rego'd as a 1975 so must comply to the 1975 ADRs. Therefore requires the tyre placard. PITA indeed. |
|
| Author: | Tspeed Jem [ Sat Jun 07, 2008 7:58 pm ] |
| Post subject: | |
Hey great, thanks guys! That should give me enough to work with. It's all pretty silly. Even though the car is a '69, the engineer and Tech standards thought it would be a better idea to engineer it as a 1/75 car seeing as there were virtually no ADR's in '69. They didn't want an engineers report that just had N/A for everything. I'm just going with the flow 
|
|
| Author: | sgc [ Sat Jun 07, 2008 8:28 pm ] |
| Post subject: | |
Bureaucracy at its best... |
|
| Author: | MINImal effort [ Sat Jun 07, 2008 8:41 pm ] |
| Post subject: | |
If it's getting down to putting on a sticker - sounds promising ! They are running out of obstacles.... Rego like to muck you about - but if you "go with the flow" get there in the end... Can't wait to see it on the road... ( but not sure on the legality when push comes to shove - if it's a 69 model it's a 69 model and built to whatever standards (or not) existed... that's the whole point ??? My Elf is 69 - no heater or demist... but no probs registering... ) |
|
| Author: | 9YaTaH [ Sat Jun 07, 2008 10:48 pm ] |
| Post subject: | 10 be's |
Tspeed Jem wrote: Hey great, thanks guys! That should give me enough to work with. It's all pretty silly. Even though the car is a '69, the engineer and Tech standards thought it would be a better idea to engineer it as a 1/75 car seeing as there were virtually no ADR's in '69. They didn't want an engineers report that just had N/A for everything. I'm just going with the flow
Ohhhhh kaaaaay....make up a sticker that says 10X6 or whatever rim width ya want  
|
|
| Author: | Tspeed Jem [ Sun Jun 08, 2008 9:02 am ] |
| Post subject: | |
Yes, getting close. Just a couple more things to do and will try rego again (maybe next week). I'm not getting my hopes up. You can never tell what rego will throw up at you, it's a waste of time arguing though, they hold all the power. 
|
|
| Author: | 9YaTaH [ Sun Jun 08, 2008 9:36 am ] |
| Post subject: | Nazis |
Tspeed Jem wrote: Yes, getting close. Just a couple more things to do and will try rego again (maybe next week). I'm not getting my hopes up. You can never tell what rego will throw up at you, it's a waste of time arguing though, they hold all the power.
There are a few in Canberra/NSW that have taken them on and succeeded....let us know how you go
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|