ausmini
https://www.ausmini.com/forums/

Cripes I actually fixed something.
https://www.ausmini.com/forums/viewtopic.php?f=2&t=4279
Page 1 of 1

Author:  ozmotorsport [ Mon Jan 24, 2005 7:11 pm ]
Post subject:  Cripes I actually fixed something.

Pulled all the wired to my Alternator off and cleaned em up and prest Alt is charging again.

Thanks for the heads up on the dirty terminals.

Author:  drmini in aust [ Mon Jan 24, 2005 7:23 pm ]
Post subject: 

Good one!
You can stop blaming Lucas Prince of Darkness, now. :lol:

Author:  13secmini [ Mon Jan 24, 2005 7:53 pm ]
Post subject: 

good one oz, we probably would have got it going at KK if a monsoon wasnt rolling in.

Should be sweet now for the wakefield day on the 9th??

Author:  ozmotorsport [ Mon Jan 24, 2005 9:17 pm ]
Post subject: 

THat's what I thought.

Author:  gafmo [ Tue Jan 25, 2005 5:15 am ]
Post subject: 

Excellent...no money lost :D

Author:  1380 yellow devil [ Tue Jan 25, 2005 8:54 am ]
Post subject: 

Time and patience is all it takes.

Author:  Mini Mad [ Tue Jan 25, 2005 4:07 pm ]
Post subject: 

Good Stuff, glad you got out of the voodoo relatively easy, as I did ;)

Author:  ozmotorsport [ Tue Jan 25, 2005 4:42 pm ]
Post subject: 

Now all I have to do is locate the clunking noise comming from the drivers side rear wheel area. Lets hope its a simple thing as well.

Author:  mooman10_0 [ Tue Jan 25, 2005 6:27 pm ]
Post subject:  m

Just change some wires back in that direction and all should be fixed! :D

If that dosent work, turn the stereo up louder!

Author:  drmini in aust [ Tue Jan 25, 2005 6:33 pm ]
Post subject: 

ozmotorsport wrote:
Now all I have to do is locate the clunking noise comming from the drivers side rear wheel area. Lets hope its a simple thing as well.

Clunk-clunk- clunk- clunk- THUD-" WTF ... whose wheel was that just went past me".. :oops: :lol: :lol:
Hey it happened to me in `67... some wally loosened me LF nuts in Oran Pk car park! :evil:

Check your wheelnuts, bearings, and the 2 nuts (inner & outer) on trailing arm shaft... also try to wiggle the arm about on the shaft.

Author:  red078 [ Tue Jan 25, 2005 6:56 pm ]
Post subject:  Re: m

mooman10_0 wrote:
Just change some wires back in that direction and all should be fixed! :D

If that dosent work, turn the stereo up louder!
,thats what I do , Tony :D

Author:  mooman10_0 [ Tue Jan 25, 2005 7:01 pm ]
Post subject:  m

Same, but it is costing me a fortune to upgrade my speakers to cover all the noises! :lol:

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/