take a pic so we can ID it.
| ausmini https://www.ausmini.com/forums/ |
|
| electronic fuel pump playing up.. https://www.ausmini.com/forums/viewtopic.php?f=2&t=42805 |
Page 1 of 1 |
| Author: | wyan [ Mon Jun 09, 2008 4:50 pm ] |
| Post subject: | electronic fuel pump playing up.. |
hi there Has anyone had trouble with electronic fuel pumps? It seems to go intermittently, car runs excellent, idles great etc. Its only been the last few days since I put a fuel filter on. Ive taken the fuel filter back off to check if it was struggling to push through it, but no change. And it does it going up hill. The pump is 1400kms old, and it was put in with the engine transplant. Im not sure what brand it is, presumably a standardish one. Ive check all the connections and ignition and all are good. Its on my A+1275 with a newly overhauled HIF44 carby. Cheers |
|
| Author: | wyan [ Mon Jun 09, 2008 8:45 pm ] |
| Post subject: | |
Anyone had any experience with them? Cheers |
|
| Author: | drmini in aust [ Mon Jun 09, 2008 8:46 pm ] |
| Post subject: | |
take a pic so we can ID it.
|
|
| Author: | wyan [ Mon Jun 09, 2008 8:51 pm ] |
| Post subject: | |
yeah i tried that but it was to dark, I'll see if i can do it again.. |
|
| Author: | wyan [ Mon Jun 09, 2008 8:59 pm ] |
| Post subject: | |
ok, ive taken a couple. just trying to put em up now... |
|
| Author: | wyan [ Mon Jun 09, 2008 9:12 pm ] |
| Post subject: | |
Ok I dont know if that worked....[/url] |
|
| Author: | wyan [ Mon Jun 09, 2008 9:13 pm ] |
| Post subject: | |
You beauty it did!!! |
|
| Author: | drmini in aust [ Mon Jun 09, 2008 9:25 pm ] |
| Post subject: | |
OK it looks like an SU electronic. Some folks had trouble with them, not sure of details as I don't run them. I use a Facet solid state electronic one.... not had a problem in 14 years. |
|
| Author: | wyan [ Mon Jun 09, 2008 9:37 pm ] |
| Post subject: | |
Ok, Yeah they're the ones Ive just been looking at on the net, Is there a recommended working pressure to look for, I think the one I was looking at is around 6psi? And also what g/hr, or L/min would be ideal? Thanks doc |
|
| Author: | drmini in aust [ Mon Jun 09, 2008 10:49 pm ] |
| Post subject: | |
http://www.australianauto.com.au/HTML/1 ... ems_01.htm Use the 2.5-4.5psi one.
|
|
| Author: | wyan [ Tue Jun 10, 2008 4:38 pm ] |
| Post subject: | |
Thanks doc, Thats the one I was looking at also, Ive ordered it. hopefully arrives soon so I can drive her again, Cheers |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|