ausmini
https://www.ausmini.com/forums/

13x6 mags off another car
https://www.ausmini.com/forums/viewtopic.php?f=2&t=42944		 Page 1 of 1
Author:  the vanman [ Fri Jun 13, 2008 9:01 pm ]
Post subject:  13x6 mags off another car
hi all just wondering if anyone has put mags off of other cars on there mini eg: gemini, corolla etc and how you made them fit.
is there any other car wit the same stud pattern.
i don't want the same wheels as everyone else, show me what wheels you all have! i want 13x6 or 7 has anyone got 14's tyres are a bit cheaper.
Author:  floss [ Fri Jun 13, 2008 9:28 pm ]
Post subject: 
I believe the PCD is different. I think on a Gem it is 4X100 and they do just fit on a mini but will come off rapidly due to vibrations....

I think you can get them redrilled though. Some people seem to be dead against this though. I looked into it but could not find anyone to re drill them for me.
David
Author:  d1ck0 [ Fri Jun 13, 2008 9:40 pm ]
Post subject: 
Didn't the HB Torana have 4" PCD (101.6mm) as well? Though standard wheel were 12" on those I believe, you may find some mags off one somewhere.

As stated above Gemini, Honda, late Mitsu, Toyo etc are all 100mm PCD. Early Mitsu, Kia, Hyundai are 106mm PCD.

Dicko.
Author:  Morris 1100 [ Fri Jun 13, 2008 9:44 pm ]
Post subject: 
d1ck0 wrote:
Didn't the HB Torana have 4" PCD (101.6mm) as well? Though standard wheel were 12" on those I believe, you may find some mags off one somewhere.

As stated above Gemini, Honda, late Mitsu, Toyo etc are all 100mm PCD. Early Mitsu, Kia, Hyundai are 106mm PCD.

Dicko.
Lots of british stuff in the 60s used the 4 inch stud pattern. Imps, Vivas, Morris Minor, etc,
Author:  drmini in aust [ Fri Jun 13, 2008 9:49 pm ]
Post subject: 
Morris 1100 wrote:
d1ck0 wrote:
Didn't the HB Torana have 4" PCD (101.6mm) as well? Though standard wheel were 12" on those I believe, you may find some mags off one somewhere.

As stated above Gemini, Honda, late Mitsu, Toyo etc are all 100mm PCD. Early Mitsu, Kia, Hyundai are 106mm PCD.

Dicko.
Lots of british stuff in the 60s used the 4 inch stud pattern. Imps, Vivas, Morris Minor, etc,

I put Austin A30 wheels on the Moke I sold recently...:mrgreen:
Author:  the vanman [ Fri Jun 13, 2008 10:10 pm ]
Post subject:  redrilling wheels
i looked around the other day and keith 4 wheels at underwood will redrill wheels for $50 a wheel.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/