ausmini https://www.ausmini.com/forums/ |
|
HELP; should my bumpers be chrome or polished stainless? https://www.ausmini.com/forums/viewtopic.php?f=2&t=43324 |
Page 1 of 2 |
Author: | marcello [ Thu Jun 26, 2008 10:51 am ] |
Post subject: | HELP; should my bumpers be chrome or polished stainless? |
hey all. can any one tell me exactly what morris 850 bumpers were made from as fitted to the cars in the factory.? were the bumpers polished stainless steel or chrome plated metal? thanks |
Author: | scotta_74 [ Thu Jun 26, 2008 11:56 am ] |
Post subject: | |
Chrome from the factory |
Author: | marcello [ Thu Jun 26, 2008 2:37 pm ] |
Post subject: | |
thanks. i was under the impression that they should be polished stainless. i cant remember why but for some reason i was almost certain it of it. so what year cars are the stainless bumpers for? anyone? |
Author: | craig goss [ Thu Jun 26, 2008 3:52 pm ] |
Post subject: | |
I was under the inpression that the rovers or the only mini's that came out with the stainless steel bumpers. The bumpers from leyland and morris minis where chrome plated, hence the rust found on most original bumpers. Hope that helps |
Author: | Goldbrocade_62 [ Thu Jun 26, 2008 4:03 pm ] |
Post subject: | |
pretty sure deluxes & k had stainless |
Author: | Ben_Aus_Mini [ Thu Jun 26, 2008 4:46 pm ] |
Post subject: | |
so what about grill and moustache scotta_74 for 850? |
Author: | morrie1310 [ Thu Jun 26, 2008 5:06 pm ] |
Post subject: | |
850 grille's are definitely chromed, I just picked mine up from the platers today |
Author: | Mick [ Thu Jun 26, 2008 5:08 pm ] |
Post subject: | |
Coopers had Stainless from the factory as well, not sure if that includes the 997 and 998 coopers...I'm torn on that one... |
Author: | Morris 1100 [ Thu Jun 26, 2008 5:25 pm ] |
Post subject: | |
My Cooper S bumpers are stainless and they are the original bumpers. |
Author: | Mike_Byron [ Thu Jun 26, 2008 5:39 pm ] |
Post subject: | |
morrie1310 wrote: 850 grille's are definitely chromed, I just picked mine up from the platers today
Matter of interest - what did it cost ??? Mike |
Author: | morrie1310 [ Thu Jun 26, 2008 6:24 pm ] |
Post subject: | |
A bit over $300 ![]() |
Author: | 1018cc [ Thu Jun 26, 2008 6:27 pm ] |
Post subject: | |
Mmmmm....fresh chrome ![]() |
Author: | TUCK3r [ Thu Jun 26, 2008 6:27 pm ] |
Post subject: | |
makes a big difference once its chromed |
Author: | morrie1310 [ Thu Jun 26, 2008 6:30 pm ] |
Post subject: | |
should have taken a before pic |
Author: | Morris 1100 [ Thu Jun 26, 2008 6:46 pm ] |
Post subject: | |
![]() ![]() |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |