| ausmini https://www.ausmini.com/forums/ |
|
| Att. brickworx https://www.ausmini.com/forums/viewtopic.php?f=2&t=4387 |
Page 1 of 1 |
| Author: | mooman10_0 [ Sat Jan 29, 2005 6:34 pm ] |
| Post subject: | Att. brickworx |
Do you have any rollbars suitable for an mg midget, or no of any. chrome! |
|
| Author: | brickworx [ Sat Jan 29, 2005 10:30 pm ] |
| Post subject: | |
I'll ask my brother what he's got. most bars are made in black nowadays |
|
| Author: | mooman10_0 [ Sun Jan 30, 2005 8:06 am ] |
| Post subject: | m |
Cool, Anything in good nic will do to start with! |
|
| Author: | mooman10_0 [ Sun Jan 30, 2005 11:35 am ] |
| Post subject: | engine |
Im probably just going to stick the 998 back in the 850 I am doing up! I am just wondering how much you would charge, if I brought down the block and head (gearbox is good, so I will keep that at home), and you did some work on it to get it sounding better and a bit more power. Bore is standard and fine, needs new rings. Engine was running fine and strong just blew alot of smoke (sitting for 5 years). The head I am happy for you to do what ever you want with to get a bit more power. All parts are just standard 998! New cam possibly.? Clutch kit and gasket kit for me to put it back together at home! Could you PM me with a ball park figure, and I can get the wheels in motion! |
|
| Author: | mooman10_0 [ Sun Jan 30, 2005 4:56 pm ] |
| Post subject: | m |
|
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|