ausmini
https://www.ausmini.com/forums/

Tie rods...
https://www.ausmini.com/forums/viewtopic.php?f=2&t=43890
Page 1 of 1

Author:  ronhic [ Mon Jul 14, 2008 11:34 pm ]
Post subject:  Tie rods...

Ok, another question from the newbie...

Will the adjustable Tie-rods for a mini that Classic Motoring sell (or anyone else for that matter) fit a Morris 1100?

...and if not, which is my guess, any good ideas about where to get replacements for mine?

K

Author:  sports850 [ Tue Jul 15, 2008 7:31 am ]
Post subject: 

Not sure off hand , how long are the M1100 tie rod's and the gap on the rear mount and we'll compare them to a mini one and see if they're in the ball park .

Author:  Mike_Byron [ Tue Jul 15, 2008 1:10 pm ]
Post subject: 

Minisports in Adelaide can supply them new - check their website and contact them.

Mike

Author:  Anto [ Tue Jul 15, 2008 1:22 pm ]
Post subject: 

Hi Chris,
I checked on a Morris 1300 last night and they look quite different. Not just the length but also where it attaches to the lower control arm.

Author:  ronhic [ Tue Jul 15, 2008 10:50 pm ]
Post subject: 

Thanks guys....

I'll give minisports a gol.....

k

Author:  Anto [ Wed Jul 16, 2008 8:42 am ]
Post subject: 

Looking at their website they only seem to supply adjustable tie bars to suit Minis, I can't see any to suit Morris 1100.

Author:  Mike_Byron [ Wed Jul 16, 2008 8:47 am ]
Post subject: 

You will have to ring them - Andrew at minisport has skype if thats easier.

The big ticket items are usually what most suppliers have on their websites.

Mike

Author:  ronhic [ Wed Jul 16, 2008 12:59 pm ]
Post subject: 

I will call...

At the moment we are surmising that this is the issue as the castor is out. We have -3 one side and + 3 on the other....

He is going to a steering place in a few weeks just to verify that it is steering and not chassis issues....

K

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/