I've been to Hay too!
| ausmini https://www.ausmini.com/forums/ |
|
| Cylinder head AEG163 - OK, what is it? https://www.ausmini.com/forums/viewtopic.php?f=2&t=4393 |
Page 1 of 1 |
| Author: | been to Hay [ Sat Jan 29, 2005 7:39 pm ] |
| Post subject: | Cylinder head AEG163 - OK, what is it? |
Found this under some shelving in the garage. AEG163. Also has a 2 cast into the thermostat body (underside). Anybody know what is for? Many thanks. |
|
| Author: | mooman10_0 [ Sat Jan 29, 2005 7:46 pm ] |
| Post subject: | m |
Im interested in the answer to this aswell as I also have one on the shelf in the shed |
|
| Author: | doogie [ Sat Jan 29, 2005 8:48 pm ] |
| Post subject: | |
MK1 Cooper S head, may say they are the best heads for a big bore engine, what are you going to do with it? Doogie |
|
| Author: | been to Hay [ Sat Jan 29, 2005 9:43 pm ] |
| Post subject: | |
mk1 s - OK, that makes some sense. It has also been ported and has had 2 dowell pins fitted for (i assume) locating the manifold as the recesses for the locating rings in the inlet ports has been ground away. I will clean it up and get it crack tested I reckon. Thanks for the reply |
|
| Author: | bnicho [ Sat Jan 29, 2005 9:47 pm ] |
| Post subject: | |
I've been to Hay too!
|
|
| Author: | doogie [ Sat Jan 29, 2005 9:50 pm ] |
| Post subject: | |
I've been 11 times, 12 after this June. Doogie |
|
| Author: | bnicho [ Sat Jan 29, 2005 9:59 pm ] |
| Post subject: | |
1999 - Wheel bearing went on the Hay Plain on the way home! 2000 - Engine blew a week before Hay, so I stayed home. 2001- Welsh plug fell out of my new motor. Found a Morris 1100 in a paddock and fitted a second-hand welsh plug from that. It worked fine! 2002 - Didn't go - had to work. 2003 - Trailered the Mini behind my 4x4. No problems. 2004 - Didn't go - had to work. 2005 - I will be there!! |
|
| Author: | min13k [ Sat Jan 29, 2005 11:34 pm ] |
| Post subject: | |
i went 2003 got sick as a dog frowing up and had diarear something cronic was shitting through the eye of a needle but other than that it was great makka |
|
| Author: | been to Hay [ Sun Jan 30, 2005 12:04 am ] |
| Post subject: | |
.h |
|
| Author: | min13k [ Sun Jan 30, 2005 12:09 am ] |
| Post subject: | |
my mini was in the final gambia green mini (turquose) female driveing i was in hotel room by this time ........ and no it was not self inflicted had a bug hopeing to have one of my cars on the road by then makka |
|
| Author: | mooman10_0 [ Sun Jan 30, 2005 8:03 am ] |
| Post subject: | m |
Just wondering what is different about these heads "AEG 163", cause when I remember looking at the one i have inthe shede, I cant remember it being much different to a normal one? |
|
| Author: | doogie [ Sun Jan 30, 2005 9:42 am ] |
| Post subject: | |
11 stud for a start, big valves, scollops around the inlet & exhaust ports, give it to me if it in the way of you 
Doogie |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|