ausmini https://www.ausmini.com/forums/ |
|
Front subframe mounting point https://www.ausmini.com/forums/viewtopic.php?f=2&t=44174 |
Page 1 of 1 |
Author: | henry the mini [ Thu Jul 24, 2008 3:04 pm ] |
Post subject: | Front subframe mounting point |
HI, before you ask i did a search, but once again i had no luck. Need to know, for the front subframe is there 6 bolts, 2 at the front and for at the top, 2 near the master cylinder and 2 near the wiper motor? Is this right? Thanks |
Author: | Harley [ Thu Jul 24, 2008 3:05 pm ] |
Post subject: | |
There's four near the steering rack too. ![]() |
Author: | Hanra [ Thu Jul 24, 2008 3:12 pm ] |
Post subject: | |
10 in total. |
Author: | Bubbacluby [ Thu Jul 24, 2008 3:26 pm ] |
Post subject: | |
yep what they said- get to them via inside the car along near the floorpan - where starts to go up. |
Author: | AEG163job [ Thu Jul 24, 2008 3:38 pm ] |
Post subject: | |
floorpan ones often a PITA to remove. You will probably need a helper unless you have arms five foot long. Vicegrips are handy............ ![]() |
Author: | sports850 [ Thu Jul 24, 2008 3:41 pm ] |
Post subject: | |
Not to mention a good soaking in WD40 or similar .... |
Author: | simon k [ Thu Jul 24, 2008 4:22 pm ] |
Post subject: | |
sports850 wrote: Not to mention a good soaking in WD40 or similar .... nah.... they should be nice and oiled up... they're right in the line of fire from oil leaks headjob wrote: unless you have arms five foot long.
I resemble that remark ![]() |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |