| ausmini https://www.ausmini.com/forums/ |
|
| coil choice? https://www.ausmini.com/forums/viewtopic.php?f=2&t=44649 |
Page 1 of 1 |
| Author: | mattsmadmini [ Fri Aug 08, 2008 2:18 pm ] |
| Post subject: | coil choice? |
nice electonic Lucas 45 dissy.... wat do you reckon would give it the most juice? i was thinkin either a gold lucas or a gt40? any other suggestions? |
|
| Author: | drmini in aust [ Fri Aug 08, 2008 2:43 pm ] |
| Post subject: | |
AFAIK Lucas never made an electronic 45D? what is inside it- a Pertronix Ignitor, Lumenition, Crane, or ??? I like the GT40 coil over the Lucas, but note the original oil filled one is supposedly more reliable than the newer epoxy filled GT40T (for Transformer) style. According to the racers... and they would know. But, if you dead set want a GT40T, I have a near new one here which I'll never have a use for. Yours cheap. 
|
|
| Author: | mattsmadmini [ Fri Aug 08, 2008 4:40 pm ] |
| Post subject: | |
Pertronix Ignitor kit...i think! (thanks matt!) it doesnt really bother me which i have i just need something to compliment the setup 
|
|
| Author: | drmini in aust [ Fri Aug 08, 2008 4:56 pm ] |
| Post subject: | |
You want a 12V coil, not a `resistor' one. So, GT40 or GT40-T, NOT GT40-R or GT40-RT. |
|
| Author: | mattsmadmini [ Sat Aug 09, 2008 1:10 am ] |
| Post subject: | |
drmini in aust wrote: You want a 12V coil, not a `resistor' one. So, GT40 or GT40-T,
NOT GT40-R or GT40-RT. cheers Kev. PM sent 
|
|
| Author: | John Smidt [ Sat Aug 09, 2008 8:49 pm ] |
| Post subject: | |
The electronic distributor that lucas made that looks exactly the same ( from the out side ) as the 45D is The 45DM4 These are best teamed up with a bosch coil Part Number HEC715 and a bosch Module Part number BIM075 You can use lucas module and coil, However I have found greater sucess with bosch |
|
| Author: | d1ck0 [ Sat Aug 09, 2008 8:51 pm ] |
| Post subject: | |
I'd just like to say that my GT40-T didn't last very long at all, and I don't think I'd buy another one. Dicko |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|