Hey all

I am having trouble with my ignition, i turn the key, and nothing happens, i dont know what to do about this , any help ???

To get my Van to start i have to jiggle the key around a just hope that it starts.

Thanks


Mark

might be looking at a new ignition switch

I would agree with that.
I'd say 90% of us can pull the key out with the IGN on aswell

_________________
Stop Licking the Dog...I Don't Care Who Started It

Do you have a bundle of key's on your keyring or just the mini key ? Mini ignition locks don't like much weight pulling on them so a bundle of key's can damage them quickly .

_________________

I had the same problem. Key was not loose but the whole barrel was, had to wiggle it a bit before the ignition light would come on and then it would start.

Replaced the outer part of the switch with another second hand one and put in old barrel so I could keep same keys. Been fine since.

http://www.minispares.com/Product.aspx?pid=36206

Thanks to all that replied,


Mark