Thanks all!
I have seen a couple on Ebay-uk with the coating chipped off the rotors...so that explains it! I just thought they may have been over boosted and the vanes had started to bend resulting in the coating chipping.
| ausmini https://www.ausmini.com/forums/ |
|
| Jonspeed & Vmax Supercharger kits https://www.ausmini.com/forums/viewtopic.php?f=2&t=44967 |
Page 1 of 1 |
| Author: | Monaco [ Mon Aug 18, 2008 10:02 pm ] |
| Post subject: | Jonspeed & Vmax Supercharger kits |
Has anyone fitted these or know much about whether they are a success? Would be interested to know as to whether they are as good as claimed to be by the makers? |
|
| Author: | slinkey inc [ Mon Aug 18, 2008 11:04 pm ] |
| Post subject: | |
Everyone here use either "Ben's kit" who's login name on here is 92 or the Link Automotive kit. |
|
| Author: | drmini in aust [ Tue Aug 19, 2008 6:45 am ] |
| Post subject: | |
There are rumours those BINI blowers don't last in suck-thru applications, as the unleaded fuel lifts the teflon coating from the rotors... |
|
| Author: | Monaco [ Wed Aug 20, 2008 7:04 pm ] |
| Post subject: | |
Thanks all! I have seen a couple on Ebay-uk with the coating chipped off the rotors...so that explains it! I just thought they may have been over boosted and the vanes had started to bend resulting in the coating chipping.
|
|
| Author: | spraycanmansam [ Thu Aug 21, 2008 12:23 am ] |
| Post subject: | |
owen1975richard wrote: Thanks all!
I have seen a couple on Ebay-uk with the coating chipped off the rotors...so that explains it! I just thought they may have been over boosted and the vanes had started to bend resulting in the coating chipping. Might of sucked in some crap too  Always good...
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|