| ausmini https://www.ausmini.com/forums/ |
|
| idle issues https://www.ausmini.com/forums/viewtopic.php?f=2&t=45148 |
Page 1 of 1 |
| Author: | woodwormm [ Sun Aug 24, 2008 10:08 pm ] |
| Post subject: | idle issues |
Got my 1 3/4 su on and tuned by a pro and it runs great but the idle position seems to only hold for a day at most. is a lock nut on the idle screw the way to go? or can i loctite the idle screw in place? i'd use a medium strength loctite. anyone got any ideas? btw it's a 1275 with a cam, 1 3/4 su extractors etc etc so it's never going to idle smooth. i'd just like to get it set so it doesnt change everyday and i can pull up at the lights without having to heel toe to stop it stalling. |
|
| Author: | simon k [ Sun Aug 24, 2008 10:56 pm ] |
| Post subject: | |
go back to your pro and get them to fix it... |
|
| Author: | brett [ Sun Aug 24, 2008 11:08 pm ] |
| Post subject: | |
my 1310cc with works cam, twin 1 3/4 idels nicely all day long and it hasn;t been tuned in 7 years. so your pro should be able to sort it. Thats why I won;t let anyone touch my SUs since the car was rebuilt |
|
| Author: | david rosenthal [ Mon Aug 25, 2008 12:51 am ] |
| Post subject: | |
Has your idle screw got a little coil spring between the head and the carby body. If not fit one. This stops the screw from vibrating out and up setting the idle setting. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|