ausmini
https://www.ausmini.com/forums/

Boot seal clips
https://www.ausmini.com/forums/viewtopic.php?f=2&t=45154		 Page 1 of 1
Author:  drmini in aust [ Mon Aug 25, 2008 10:39 am ]
Post subject:  Boot seal clips
OK there are 26 spring clips (new), I haven't fitted any of these for 30+ years, the last couple of times I just glued the seal onto the bootlid.
What is the trick- do you put them all on the bootlid first and try to feed the seal along them, or push each one in whilst held into the seal? :?

I have about 6 manuals, and not one covers it... :evil:
Author:  graham in aus [ Mon Aug 25, 2008 10:44 am ]
Post subject: 
Last one I did Kev, I used the latter technique! :P

I have heard people complain about this job, but I found it relatively straightforward? :?

Might be some deal with having the right profile of seal and clip combo?

Good luck! :lol:
Author:  Mick [ Mon Aug 25, 2008 10:55 am ]
Post subject: 
I mounted the clips and tried to push the rubber on last time and regretted it.
Author:  drmini in aust [ Mon Aug 25, 2008 10:57 am ]
Post subject: 
I am using a Karcraft seal, the sponge has a bigger hole than that from another western suburbs supplier so hopefully it won't need 5 people to close the lid the first time like Anton's did. :lol:
Author:  Mick [ Mon Aug 25, 2008 11:24 am ]
Post subject: 
yep, had that problem too...
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/