| ausmini https://www.ausmini.com/forums/ |
|
| New door cards for 65 Deluxe https://www.ausmini.com/forums/viewtopic.php?f=2&t=45255 |
Page 1 of 1 |
| Author: | miniDave [ Thu Aug 28, 2008 1:14 pm ] |
| Post subject: | New door cards for 65 Deluxe |
Could I get some advice please whether these will fit an Australian 65 Deluxe. Not sure about the hole position for the winder etc. http://minispares.com/Product.aspx?pid=35245 I have already ordered the red carpet set and would like to match the colour. 
If they don't fit could anyone suggest some trimmers in the Sydney area that could match the colour and who could vinyl weld in the lines to match the original. Many thanks |
|
| Author: | Mick [ Thu Aug 28, 2008 1:26 pm ] |
| Post subject: | |
They're designed for a different set of doors, ie the UK wind ups from 1970 onward (which share no similarities with our own windups). You could ask them to do a set of blanks with no holes, they have done this other times I am aware of. You should be able to trim them to suit your own needs then with a cheap set of supercheap wad bunches. You might need to alter the length and width yourelf pretty simply as well. There is a trimmer in Sydney who does the vinyld door cards with the hot wheel vinyl welding...I've forgotten his name....Last time I looked it was 450 for all 4 however, but if you add up the cost of materials it's not really that over the top... I think he's near the international airport... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|