Yes I know what it is but just a bit of a test for those out thier and its quiet on here
| ausmini https://www.ausmini.com/forums/ |
|
| Nice Head https://www.ausmini.com/forums/viewtopic.php?f=2&t=45304 |
Page 1 of 1 |
| Author: | gafmo [ Fri Aug 29, 2008 8:55 pm ] |
| Post subject: | Nice Head |
Yes I know what it is but just a bit of a test for those out thier and its quiet on here
|
|
| Author: | 1018cc [ Fri Aug 29, 2008 8:58 pm ] |
| Post subject: | |
That's one nice looking head job 
|
|
| Author: | kuzzy [ Fri Aug 29, 2008 9:17 pm ] |
| Post subject: | |
Give us a hint. I'm sure its not a KAD. Looks great, how much power will it make? |
|
| Author: | gafmo [ Fri Aug 29, 2008 9:17 pm ] |
| Post subject: | |
no not a KAD |
|
| Author: | kuzzy [ Fri Aug 29, 2008 9:22 pm ] |
| Post subject: | |
Wot about BMW bike head? |
|
| Author: | gafmo [ Fri Aug 29, 2008 9:40 pm ] |
| Post subject: | |
rite make 
|
|
| Author: | TheMiniMan [ Fri Aug 29, 2008 10:44 pm ] |
| Post subject: | |
John K (Specialised Components England) 16v K1100 BMW motorbike cyl head conversion I have 30x of my own 
|
|
| Author: | sgc [ Fri Aug 29, 2008 11:04 pm ] |
| Post subject: | |
Joisus that's a big head. They put those on bikes?? |
|
| Author: | Archangel007 [ Sat Aug 30, 2008 2:48 am ] |
| Post subject: | |
sgc wrote: Joisus that's a big head. They put those on bikes??
Would you call that a 'boof head' then Simon? |
|
| Author: | mini-dunger [ Sat Aug 30, 2008 7:50 am ] |
| Post subject: | |
is it an engine? |
|
| Author: | My_Mini_Rocks [ Sat Aug 30, 2008 10:58 am ] |
| Post subject: | K.A.D. Head |
Oh while we are on the topic of heads, 2 of these puppies (KAD twin cam engine kits) came in this week.... 
Both have already been dyno'ed' at around 180bhp |
|
| Author: | ollie [ Sat Aug 30, 2008 12:26 pm ] |
| Post subject: | |
oh my ! (wipes drool from keyboard) 
|
|
| Author: | swiftden [ Sat Aug 30, 2008 12:34 pm ] |
| Post subject: | |
What is something like this worth? and do they need special radiators etc to keep em cool. Will they fit in a roundy without body mods ? |
|
| Author: | My_Mini_Rocks [ Sat Aug 30, 2008 3:37 pm ] |
| Post subject: | |
Quote: What is something like this worth? and do they need special radiators etc to keep em cool. Will they fit in a roundy without body mods ?
Around $40,000- That comes complete with bonnet, loom (for all injection, computer, full exhaust system, 5 speed dog box, straight cut drop gears, LSD, plus more On the cooling an alloy radiator with a thermo fan should keep it cool. It will fit (with supplied bonnet) in a roundy- but it will be tight the radiator shroud has to go, but that should be about it- i'll let you know once we have one fully installed. This is from the KAD website: 170-180bhp, capacity 1380-1460cc. KAD latest spec big valve 16 valve cylinder head with belt assembly, A+ block with four bolt centre main cap, bored and honed 73.5mm flat top Cosworth or Omega forged pistons Vandervell Competition engine bearings EN40B billet steel crankshaft 81.28-86mm stroke Forged steel Arrow conrods HP oil pump, water pump Aldon distributor with Ignitor Electronic ignition KAD alloy flywheel and backplate AP grey diaphragm pressure plate and clutch 4-2-1 exhaust manifold and 2" bore twin box system Top and bottom radiator hoses, top radiator mounting Complete engine unit built and dyno run Engine as above with Omex Engine management, this includes complete wiring loom and fuel system |
|
| Author: | bamnfi [ Sat Aug 30, 2008 4:46 pm ] |
| Post subject: | |
Hey Andrew, nice kit. My cooper is nearly on the road with the 5 speed I bought from you guys. I can' wait  No way I could afford this monster tho 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|