| ausmini https://www.ausmini.com/forums/ |
|
| Don't you just hate that? https://www.ausmini.com/forums/viewtopic.php?f=2&t=4553 |
Page 1 of 1 |
| Author: | Wombat [ Fri Feb 04, 2005 6:04 pm ] |
| Post subject: | Don't you just hate that? |
A while back when I raided the local wreckers for Civic dics I got everything but one of the discs wouldn't budge and I ran out of time as they were closing - I happened to be passing before Christmas and went in and sized up what I thought I'd need to get it off. Today I went back with the BFH and the impact driver and not a bloody Civic in sight - All gone - zilch - not one Gone to the crusher says the man in charge 
|
|
| Author: | sg [ Fri Feb 04, 2005 6:22 pm ] |
| Post subject: | |
What wreckers was that Wombat????? 
|
|
| Author: | Rising Star [ Fri Feb 04, 2005 11:01 pm ] |
| Post subject: | |
maybe a stupid quesiton but why not just get new disks? if you pull them off with a BFH then you are likely to mark the rotors and render them fairly useless if you are gonna bash them off atleast use some care and use a rubber mallet sorry just a question that always confuses me |
|
| Author: | drmini in aust [ Sat Feb 05, 2005 6:35 am ] |
| Post subject: | |
DBA191 is the # of the disc, I think they're only $50 or so new. 
|
|
| Author: | Wombat [ Sat Feb 05, 2005 7:51 am ] |
| Post subject: | |
I did think that it would be better to get new ones undrilled and have the studs drilled to the right spacing 
|
|
| Author: | Wombat [ Sat Feb 05, 2005 7:55 am ] |
| Post subject: | |
SG It was the ABC Wreckers at Oxley - there is a Pulsar with a D85 dizzy in it - I removed it from the block but when I pulled the coil lead off the cap was broken. Decided I didn't really need it so left it with LT leads attached behind the grill |
|
| Author: | Mini Mad [ Sat Feb 05, 2005 8:00 am ] |
| Post subject: | |
Rising Star wrote: maybe a stupid quesiton
but why not just get new disks? if you pull them off with a BFH then you are likely to mark the rotors and render them fairly useless if you are gonna bash them off atleast use some care and use a rubber mallet sorry just a question that always confuses me He said a BFH AND an Impact Driver, which will get them off no problems, if they were there. you don't actually bash the disk off... I agree, just go buy a pair new.. |
|
| Author: | simon k [ Sat Feb 05, 2005 6:50 pm ] |
| Post subject: | |
Wombat wrote: SG It was the ABC Wreckers at Oxley - there is a Pulsar with a D85 dizzy in it - I removed it from the block but when I pulled the coil lead off the cap was broken. Decided I didn't really need it so left it with LT leads attached behind the grill
hey!! go back and grab it for me could you - I'll buy a new cap at repco! |
|
| Author: | Wombat [ Sat Feb 05, 2005 7:26 pm ] |
| Post subject: | |
Unfortunately I'm tied to the house until next Saturday. I'm on-call for work all weekend 24 hours a day Sat and Sun and 7:30 pm to 7 am weeknights Sorry -
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|