| ausmini https://www.ausmini.com/forums/ |
|
| Is it possible to get new door lock bits (77 Mini) https://www.ausmini.com/forums/viewtopic.php?f=2&t=45551 |
Page 1 of 1 |
| Author: | marcsvenson [ Sun Sep 07, 2008 6:48 pm ] |
| Post subject: | Is it possible to get new door lock bits (77 Mini) |
Hi all My door locks need some loving and i was just wondering if you can get new bit for them. The whole lots pretty average. Thanks |
|
| Author: | Spaceboy [ Sun Sep 07, 2008 8:59 pm ] |
| Post subject: | |
i dont think so? best to start looking for good second hand, should be plenty of mini places around with clubby doors. otherwise it takes a bit of magic but you can adjust everything up and they can work well again. |
|
| Author: | scotta_74 [ Sun Sep 07, 2008 9:23 pm ] |
| Post subject: | Re: Is it possible to get new door lock bits (77 Mini) |
marcsvenson wrote: Hi all
My door locks need some loving and i was just wondering if you can get new bit for them. The whole lots pretty average. Thanks Dependant upon what "Bits" your talking about, your best chance is John at Mini King. Do you have part number at all or a pic? Cheers, Scott |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|