tinymorris1969 wrote:
does anyone know what 133 would be?
It's what's left after he has used an undersize grinding wheel on the block to remove the dodgy engine number
There must be more then that, any pics????
| ausmini https://www.ausmini.com/forums/ |
|
| weird engine number https://www.ausmini.com/forums/viewtopic.php?f=2&t=45563 |
Page 1 of 2 |
| Author: | tinymorris1969 [ Sun Sep 07, 2008 10:59 pm ] |
| Post subject: | weird engine number |
looked at a 75 clubby panelvan today and it seemed ok, needs some work but one thing puzzled me. the owner couldnt work out what engine size it was, he thinks it may be a 1100. i went and check the engine number and the only numbers i could see was 133. i looked at the complience plate and i couldnt work it out there either. does anyone know what 133 would be? |
|
| Author: | sgc [ Sun Sep 07, 2008 11:12 pm ] |
| Post subject: | Re: weird engine number |
tinymorris1969 wrote: does anyone know what 133 would be?
That would be not enough numbers... |
|
| Author: | tinymorris1969 [ Sun Sep 07, 2008 11:14 pm ] |
| Post subject: | |
i know but thats all i could see on the block. seems abit dodgy but he reckons hes taken it to mini classic and mini spares and they reckon its a great little van. and the motor is good. shame the thrust bearings finished. |
|
| Author: | sgc [ Sun Sep 07, 2008 11:39 pm ] |
| Post subject: | |
tinymorris1969 wrote: shame the thrust bearings finished.
Why is that a shame? That's gotta be the easiest bearing to fix... |
|
| Author: | tinymorris1969 [ Sun Sep 07, 2008 11:43 pm ] |
| Post subject: | |
.. i said it to him to sorta break him down to reality abit. he wants a firm 6 grand for a van with some serious little rust spots and someother little problems |
|
| Author: | scotta_74 [ Mon Sep 08, 2008 4:43 pm ] |
| Post subject: | Re: weird engine number |
tinymorris1969 wrote: does anyone know what 133 would be?
It's what's left after he has used an undersize grinding wheel on the block to remove the dodgy engine number There must be more then that, any pics????
|
|
| Author: | 1310/71 [ Mon Sep 08, 2008 5:07 pm ] |
| Post subject: | |
What engine number was on the rego papers? Yes I know you probably didn't see them - it's a rhetorical question (i put this in first as I can predict what Joe's response would be  )
The only time the engine number is going to be an issue previously is if it had been issued a blue slip or been over the old "pits" years ago. Did it have fairly new style numberplates or original issue? If it had got onto the system in the days when matching of details was less of an issue for the RTA, then it has probably been allowed to stay that way. However, it could very well become a problem in the future for you or other prospective buyers. It could also be that the original (or legally registered) block has been skimmed and partially removed the numbers. Sounds like the current owner is oblivious to this though. KB |
|
| Author: | Morris 1100 [ Mon Sep 08, 2008 5:19 pm ] |
| Post subject: | |
If you get pulled up by the police for a random roadworthy check it could cause a problem. |
|
| Author: | tinymorris1969 [ Mon Sep 08, 2008 7:17 pm ] |
| Post subject: | |
hmmm. well i couldnt see any more numbers after it and they werent neatly punched on in line. they were alil out of line to eachother. well considering that this van was on ebay alil while ago. remember the checker plate interior van? thats the one i check out and i think the engine number would be the least of my worries 
wants 6grand for it... what u reckon 4grand? |
|
| Author: | ollie [ Mon Sep 08, 2008 7:23 pm ] |
| Post subject: | |
6 grand? bit high, but u could weigh in the chequer plate for scrap should get a good bit for all that! 
|
|
| Author: | TUCK3r [ Mon Sep 08, 2008 7:24 pm ] |
| Post subject: | |
It really looked better on ebay. i'd rather buy the one in the ausmini for sale section looks like a much nicer van. Probaly wont give you any trouble like this one could if the engine number is dodgy. cheers TUCK3R |
|
| Author: | tinymorris1969 [ Mon Sep 08, 2008 7:24 pm ] |
| Post subject: | |
lol the funny thing is its not even real checker plate.... its plastic on some ply board |
|
| Author: | ollie [ Mon Sep 08, 2008 7:28 pm ] |
| Post subject: | |
jeez, fake chequer plate! only worth 2 grand now!
|
|
| Author: | tinymorris1969 [ Mon Sep 08, 2008 7:28 pm ] |
| Post subject: | |
the only real benefit from it would be it has disk brakes and 12" mini lites lol and its a really smooth running mini |
|
| Author: | ollie [ Mon Sep 08, 2008 7:32 pm ] |
| Post subject: | |
Seriousley,from the pics not 6 grand worth, 4 maybe, there must be a couple grand worth of body work and paint required. And any word on tiny? |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|