My March 1970 MiniMatic has the dipper on the arm, no dipswitch on the floor.
If that helps.
| ausmini https://www.ausmini.com/forums/ |
|
| hi beam https://www.ausmini.com/forums/viewtopic.php?f=2&t=45836 |
Page 1 of 1 |
| Author: | 1970cooper [ Tue Sep 16, 2008 7:21 pm ] |
| Post subject: | hi beam |
on my cooper s mk2 I have noticed that the hi beam operates off the blinker arm. I do have the floor switch installed but the 4 wires have been cut 1 inch from the switch. Is this normal on the mk2 cooper regards Felix |
|
| Author: | doogie [ Tue Sep 16, 2008 7:22 pm ] |
| Post subject: | |
High beam is a MK2 S is on the blinker arm, wires were cut in the factory. Doogie |
|
| Author: | 1970cooper [ Tue Sep 16, 2008 7:28 pm ] |
| Post subject: | |
thanks doogie |
|
| Author: | Mick [ Tue Sep 16, 2008 7:40 pm ] |
| Post subject: | |
I've had two mk2's with the dipper on the floor....they both had the wires cut to the dipper on the arm as well... they were April 70 and May 69 models. Was there a changeover point? |
|
| Author: | 1970cooper [ Tue Sep 16, 2008 8:47 pm ] |
| Post subject: | |
Mine was built in Nov 1970 if that helps |
|
| Author: | drmini in aust [ Tue Sep 16, 2008 9:36 pm ] |
| Post subject: | |
My March 1970 MiniMatic has the dipper on the arm, no dipswitch on the floor. If that helps.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|