ausmini
https://www.ausmini.com/forums/

Water Pump Impeller
https://www.ausmini.com/forums/viewtopic.php?f=2&t=45881		 Page 1 of 1
Author:  66S [ Thu Sep 18, 2008 6:21 am ]
Post subject:  Water Pump Impeller
Hi guys,
I'm not having much luck finding a deep impeller (or kit containing one) for a 1275 S original cast iron water pump. Any ideas?

Kind regards
Al
Author:  Daniel Butler [ Thu Sep 18, 2008 10:02 am ]
Post subject: 
Not sure how you feel about importing parts but we have heaps over here on the mainland :D

http://www.minisport.com.au/prod135.htm
Author:  simon k [ Thu Sep 18, 2008 10:10 am ]
Post subject: 
I think Al wants to recondition the original S water pump.....

I've got my original pump stored away for the same purpose, when a kit appears, I'll grab one

Mini King?
Author:  John Smidt [ Thu Sep 18, 2008 4:08 pm ]
Post subject: 
simon k wrote:
I think Al wants to recondition the original S water pump.....

I've got my original pump stored away for the same purpose, when a kit appears, I'll grab one

Mini King?

I have not been able to buy a kit for the water pump for some time now,
However what I do is have the old cast iron impellor machined where it wears near the seal area and take the same amount of the impellor, Providing this is not excessive, then fit back together with new seal and bearing
Author:  66S [ Fri Sep 19, 2008 7:08 am ]
Post subject: 
Thanks guys. I am trying to find a couple of impellers so that I can build up a spare pump and have a spare impeller for one day. The spare pump I have has a shallow impeller and I want to fit a deep impeller like I've got fitted to me engine now. It had a shallow impeller originally but I've slightly modifed the block to take the bigger pump.

I'll try Miniking, thanks Simon.

Al
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/