this is the one out of Danielles mini... it wont be going back in
| ausmini https://www.ausmini.com/forums/ |
|
| Prices on half cage https://www.ausmini.com/forums/viewtopic.php?f=2&t=4662 |
Page 1 of 1 |
| Author: | Stuartminidlx [ Tue Feb 08, 2005 9:56 pm ] |
| Post subject: | Prices on half cage |
Been wanting a cage for awhile now read the other thread on half cages. but does anyone no where to get one and how much they cost. needs to be in NSW. plz |
|
| Author: | ozmotorsport [ Wed Feb 09, 2005 7:42 am ] |
| Post subject: | |
Bond Roll bars in Regents Park to a good new half cage. The Alloy one looks pretty schmick but is only for looks. If you are thinking of using it for supersprints or expanding it to a six point in the future you must put a steel one in. I paid abour $350 for my half cage (alloy) about 4 years ago. I do know of a second hand one for sale but not sure of the quality. Let me knwo if you would like me to chase it up. |
|
| Author: | MiniK [ Wed Feb 09, 2005 10:59 am ] |
| Post subject: | |
any idea what a steel one goes for chris? |
|
| Author: | mickmini [ Wed Feb 09, 2005 12:44 pm ] |
| Post subject: | |
you can get away with a alloy cage in a road registered car at supersprints because they do not have to have a CAMS logbook. otherwise CAMS rules are that all cages have to be steel and i believe that they must also have only welded joints now. makes it expensive because the old cheap bolt together cages are not allowed any more. there is another place around the corner from Bonds who also do good mini cages, but i can't remember their name. michael |
|
| Author: | ozmotorsport [ Wed Feb 09, 2005 2:37 pm ] |
| Post subject: | |
Thanks Mick Mini I think you just saves me $$$$ I was not aware Bolt in were no longer allowed. That's what I was saving up for then I was going to go U2L Improved Production Car racing. Imagine how happy I would have been when I could not get the car log booked. |
|
| Author: | danidad [ Thu Feb 10, 2005 1:07 am ] |
| Post subject: | |
|
this is the one out of Danielles mini... it wont be going back in |
|
| Author: | ozmotorsport [ Thu Feb 10, 2005 7:23 am ] |
| Post subject: | |
Hey Danidad, I asked you about that half cage in a previous email. If you are selling I have my hand up. |
|
| Author: | danidad [ Thu Feb 10, 2005 1:04 pm ] |
| Post subject: | |
musta missed that one, we only just realised we cant use it anyway so it is unwanted. i sent the dimentions to someone else recently.firstly its a pain to get in or out, we wouldn't have managed if the windscreen was in. freight would be exy too |
|
| Author: | mickmini [ Thu Feb 10, 2005 1:29 pm ] |
| Post subject: | |
oz, i'm pretty sure you can bolt it in, but the joins of the bars have to be welded. Just have to check the latest schedule J in the CAMS manual... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|