| ausmini https://www.ausmini.com/forums/ |
|
| Kent cams https://www.ausmini.com/forums/viewtopic.php?f=2&t=46826 |
Page 1 of 1 |
| Author: | bamnfi [ Mon Oct 20, 2008 9:16 am ] |
| Post subject: | Kent cams |
I was wondering are there any resident experts on Kent cams? I have one stamped 2668. I have heard of 266 but not a 2668. Any clues folks? |
|
| Author: | Timinik [ Tue Oct 21, 2008 12:44 pm ] |
| Post subject: | |
havnt heard of the 2668 either, mine is MD266... |
|
| Author: | BALLISTIC [ Tue Oct 21, 2008 1:26 pm ] |
| Post subject: | |
Are you sure its a kent cam and not a re-grind from somewhere else with that master number using kent specs? I can send it to my cam grinders and get a spec sheet....... |
|
| Author: | bamnfi [ Tue Oct 21, 2008 3:30 pm ] |
| Post subject: | |
thx ballistic, I may take you up on that. I have e-mailed Kent and am waiting on their reply. If I come up with zip I will come back to you. |
|
| Author: | bamnfi [ Tue Oct 21, 2008 3:39 pm ] |
| Post subject: | |
OK, now I know! I should have checked my e-mail first, doh! The B refers to the oil pump drive. It is basically the 266 Kent cam. Onward and forward and now to assemble the thang. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|