i think these were fitted to the late model clubbies 77-78,,, not sure it GT's ever had one, mine dosnt, but its just pretend
| ausmini https://www.ausmini.com/forums/ |
|
| bonnet latch and cable https://www.ausmini.com/forums/viewtopic.php?f=2&t=4709 |
Page 1 of 1 |
| Author: | ClubmanGT [ Thu Feb 10, 2005 7:21 pm ] |
| Post subject: | bonnet latch and cable |
This is on ebay (can't find an existing thread on it). Were these ever fitted to the GT? I've never heard of them but some of you may have. http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=4526163367&ssPageName=ADME:B:EF:AU:1 |
|
| Author: | 13secmini [ Thu Feb 10, 2005 7:30 pm ] |
| Post subject: | |
i think these were fitted to the late model clubbies 77-78,,, not sure it GT's ever had one, mine dosnt, but its just pretend
|
|
| Author: | ausminis4u [ Fri Feb 11, 2005 11:42 am ] |
| Post subject: | |
it is deffinately not gt, its from a 77-78 s, ss or ls . they are pretty hard to get though. but i have one 
|
|
| Author: | PEDDRO [ Fri Feb 11, 2005 3:37 pm ] |
| Post subject: | |
They're TOO easy to make. Mine came from a Marina (I think). Drill a hole in your bonnet pull. Cut the useless bit off. Bolt it all in all hook the cable up....you can even run the cable out an existing hole in the firewall. Put a metal plate behind the grill's bonnet pull hole and you're done. |
|
| Author: | ClubmanGT [ Sat Feb 12, 2005 3:05 am ] |
| Post subject: | |
Thanks guys. Didn't think the GT ever had one fitted. |
|
| Author: | gafmo [ Sat Feb 12, 2005 6:50 am ] |
| Post subject: | |
I'v got one also...not fitted Yet..Uk ebay payed$20 including freight |
|
| Author: | ausminis4u [ Mon Feb 14, 2005 10:06 am ] |
| Post subject: | |
gafmo wrote: I'v got one also...not fitted Yet..Uk ebay payed$20 including freight yours is different though mate, ( i hope you are fitting it to a round nose)............
|
|
| Author: | J_A_M [ Mon Feb 14, 2005 11:54 am ] |
| Post subject: | |
PEDDRO wrote: They're TOO easy to make. Mine came from a Marina (I think). Drill a hole in your bonnet pull. Cut the useless bit off. Bolt it all in all hook the cable up....you can even run the cable out an existing hole in the firewall. Put a metal plate behind the grill's bonnet pull hole and you're done.
here here!! I am doing this mod to my Clubby....very easy stuff!
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|