ausmini
https://www.ausmini.com/forums/

door handle removal of 68 roundnose
https://www.ausmini.com/forums/viewtopic.php?f=2&t=47240		 Page 1 of 1
Author:  anth [ Mon Nov 03, 2008 7:21 pm ]
Post subject:  door handle removal of 68 roundnose
G'day all,
I have been working on my mini and have started stripping the doors ,how in the hell do you remove the two screws that secure the door handles :?:
Do you have to drill 2 holes in order to allow access to the screw's or is there some secret :?

Any help would be appreciated
cheers Anth
Author:  drmini in aust [ Mon Nov 03, 2008 7:54 pm ]
Post subject: 
There are 3 screws not 2.
Stick a screwdriver through the hole where the chromed cap was.
Of course, you have to remove the window, & door lock etc first.
Fun job, I've just done mine... :lol:
Author:  anth [ Mon Nov 03, 2008 8:17 pm ]
Post subject: 
Bugger another screw! :wink:

everything is stripped out of them,it just these handles stopping me from putting them back to bare metal.... :twisted:
i have removed the chrome cap ,i just did think there was enough room to get at it with a screw driver will try tmrw


any secrets :wink:

cheers Anth
Author:  drmini in aust [ Mon Nov 03, 2008 8:19 pm ]
Post subject: 
The circlip has to come off first, it is a bastard to get back on, so I leave mine off- just bend that U-shaped link lever out a little and clip is not needed.
Author:  Number86 [ Tue Nov 04, 2008 9:08 am ]
Post subject: 
I have just reassembled my doors after painting them. Allow yourself lots of time, and don't become too attached to the skin on your knuckles!

I found the door handle screws not too bad to get at.... Just make sure you use the correct size phillips head so that you don't strip the screws.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/