1/2" BSP 14tpi, parallel.
| ausmini https://www.ausmini.com/forums/ |
|
| Oil Cooler Thread Type https://www.ausmini.com/forums/viewtopic.php?f=2&t=47725 |
Page 1 of 1 |
| Author: | matt van'74 [ Wed Nov 19, 2008 8:00 pm ] |
| Post subject: | Oil Cooler Thread Type |
Hi, I got given an oil cooler from a mate today which was off his Renault 750 race car. It is an Earl's Oil Supply Brand or something like that and it is an 11 row type. I measured the the thread on the fittings and it appears to be a 1/2" BSP thread which is 14 TPI. I dont have an S cooler to check so can someone please tell me what thread the S coolers have? Cheers Matt |
|
| Author: | drmini in aust [ Wed Nov 19, 2008 9:40 pm ] |
| Post subject: | |
1/2" BSP 14tpi, parallel.
|
|
| Author: | matt van'74 [ Thu Nov 20, 2008 5:42 am ] |
| Post subject: | |
Sounds like 1/2" BSP must be a universal type thread for the fittings (or for atleast that era). Yet again, Thanks Doc! Matt |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|