in that case, get on to the EU/UK mini forums and find other innocenti owners
if you keep the doors that is - if not, I'll swap you a couple of good condition aussie doors
| ausmini https://www.ausmini.com/forums/ |
|
| inocenti door window seals and 1/4 window seal https://www.ausmini.com/forums/viewtopic.php?f=2&t=47925 |
Page 1 of 3 |
| Author: | min196 [ Wed Nov 26, 2008 11:17 am ] |
| Post subject: | inocenti door window seals and 1/4 window seal |
hey i was just wondering if anyone would be able to tell me where i would be able to find these window seals for front passennger and the front driver and also need the 1/4 window rubber thnks |
|
| Author: | min196 [ Thu Nov 27, 2008 5:15 pm ] |
| Post subject: | |
any one???? |
|
| Author: | henry the mini [ Thu Nov 27, 2008 5:30 pm ] |
| Post subject: | |
Minisport in Adelaide!!! Check their web site Louis |
|
| Author: | feralsprint [ Thu Nov 27, 2008 5:35 pm ] |
| Post subject: | |
min196 wrote: any one????
Where are you located, if NSW try the miniking or the teh lads at padstow, if melbourne try Northern or link or Lindsay, SA try minisport or Brickworx or you can try classic motoring, all the contacts are in the how to's |
|
| Author: | simon k [ Thu Nov 27, 2008 7:08 pm ] |
| Post subject: | |
go somewhere you can look at them before you buy, just to make sure innocenti ones are the same as aussie ones... have you visually compared your 1/4 vent windows with some on an aussie car? |
|
| Author: | drmini in aust [ Thu Nov 27, 2008 7:10 pm ] |
| Post subject: | |
Trust me, the quarter vents ARE different. I bet the other weatherstrips are different to an Oz Mini too. |
|
| Author: | simon k [ Thu Nov 27, 2008 7:14 pm ] |
| Post subject: | |
in that case, get on to the EU/UK mini forums and find other innocenti owners if you keep the doors that is - if not, I'll swap you a couple of good condition aussie doors
|
|
| Author: | min196 [ Thu Nov 27, 2008 7:25 pm ] |
| Post subject: | |
hahah that easy said then done 
but i want to keep it original.. dose anyone know any EU/UK mini forums ??? |
|
| Author: | feralsprint [ Thu Nov 27, 2008 7:29 pm ] |
| Post subject: | |
you can try these ones http://www.turbominis.co.uk/forums/index.php or http://www.minifinity.com/ |
|
| Author: | min196 [ Thu Nov 27, 2008 7:30 pm ] |
| Post subject: | |
sweet thanks for that
|
|
| Author: | simon k [ Thu Nov 27, 2008 7:31 pm ] |
| Post subject: | |
min196 wrote: does anyone know any EU/UK mini forums ???
try google... http://www.google.com.au/search?sourceid=navclient&ie=UTF-8&rls=RNWE,RNWE:2005-13,RNWE:en&q=innocenti+mini+forum |
|
| Author: | 69elf [ Tue Dec 02, 2008 6:24 pm ] |
| Post subject: | |
The Aussie 1/4 light window seals do fit the Inno front opening 1/4 lights. They are a perfect match. Even the rivet holes are in teh same place. I did it about 6 months ago on the inno windows I'm putting in the Elf. |
|
| Author: | drmini in aust [ Tue Dec 02, 2008 6:36 pm ] |
| Post subject: | |
Aren't Inno ones lots different in the front corner of the 1/4 window? I thought they had a sharp corner there, not a 45 deg? angled bit like Oz ones. 
Can you please show us a pic? |
|
| Author: | min196 [ Tue Dec 02, 2008 6:58 pm ] |
| Post subject: | |
hey yeah it is this is the pic of it 
iv called all round syd but no one knows what im talkin about or dosnt belive me lol dose anyone have any contacts in italy??? or know if i can get these made? thanks |
|
| Author: | drmini in aust [ Tue Dec 02, 2008 7:22 pm ] |
| Post subject: | |
Cool, I was right for once. Maybe Elf has Oz doors in his then?
Try a Fiat dealer, those windows look near identical to the ones in my 1969 Fiat 124AC coupe.. when I had it. Right down to the chromed tin rain deflector, and the stuck-on catch... |
|
| Page 1 of 3 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|