Put a vernier caliper across the bore.. to be sure, to be sure.
Std bore is 70.6mm.
| ausmini https://www.ausmini.com/forums/ |
|
| mowog m2179 standard bore 1275 pistons?? https://www.ausmini.com/forums/viewtopic.php?f=2&t=48769 |
Page 1 of 1 |
| Author: | leema [ Mon Dec 29, 2008 4:12 pm ] |
| Post subject: | mowog m2179 standard bore 1275 pistons?? |
i just ripped the head off my 1275 due to oil leaking out the gasket and found mowog m2179 pistons. im assuming these are standard bore 1275 pistons?? im about 99.9% sure but thought id double check. cheerz matt |
|
| Author: | drmini in aust [ Mon Dec 29, 2008 6:10 pm ] |
| Post subject: | |
Put a vernier caliper across the bore.. to be sure, to be sure.
Std bore is 70.6mm. |
|
| Author: | simon k [ Mon Dec 29, 2008 10:01 pm ] |
| Post subject: | |
here's a google result.... from what they're saying, you're probably looking at the original pistons that came from the factory! 
http://mcr.mywowbb.com/forum30/3112.html |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|