If you want to be tight, just use and old pallet, attach a castor to each corner, done
| ausmini https://www.ausmini.com/forums/ |
|
| Mini shell 'trolly thing' https://www.ausmini.com/forums/viewtopic.php?f=2&t=48812 |
Page 1 of 1 |
| Author: | poeee [ Wed Dec 31, 2008 1:32 pm ] |
| Post subject: | Mini shell 'trolly thing' |
I'm sitting at work and can't get my head around how big this thing needs to be, so i'll ask. (note: I work at a hardware store and wanna get the stuff before end of the day!) I wanna put my Moke shell up on a stand with wheels, a trolly thing, or whatever ya call it! I know many of you have built one. Just wanna know the dimensions of yours so I can get some stuffs! |
|
| Author: | Andy [ Wed Dec 31, 2008 1:39 pm ] |
| Post subject: | |
If you want to be tight, just use and old pallet, attach a castor to each corner, done
|
|
| Author: | poeee [ Wed Dec 31, 2008 1:49 pm ] |
| Post subject: | |
Andy wrote: If you want to be tight, just use and old pallet, attach a castor to each corner, done
I see... I need it to be a bit higher... so 4 pallets? Hahahaha! I don't need to be that tight, however. |
|
| Author: | henry the mini [ Wed Dec 31, 2008 5:11 pm ] |
| Post subject: | |
My shell sitting on a pallet and wheel, best thing since mini!!! |
|
| Author: | 1310/71 [ Wed Dec 31, 2008 5:51 pm ] |
| Post subject: | |
Check Anton's GT site - he used to have details of his one on his old JAM site. If it isn't on the new site, PM him. He sold it I think, but would probably still have the dimensions at least. KB |
|
| Author: | miniDave [ Wed Dec 31, 2008 6:48 pm ] |
| Post subject: | |
poeee wrote: Andy wrote: If you want to be tight, just use and old pallet, attach a castor to each corner, done I see... I need it to be a bit higher... so 4 pallets? Hahahaha! I don't need to be that tight, however. Four old tyres fit nicely on a pallet. Go for a 245 size tyre and you get high enough. |
|
| Author: | frednutz&co [ Wed Dec 31, 2008 8:07 pm ] |
| Post subject: | |
i have one of mine sitting on an old bread dolly on 2 car tyres,used to work in a bakery  easy to roll around .came at the right price too.
|
|
| Author: | Lockie91 [ Wed Dec 31, 2008 8:49 pm ] |
| Post subject: | |
hi mate, take a look at this. It might help you get some idea's. I built it myself, came in very handy. You could also buy it off me if you wanted ( as you can see) , lol as its for sale, as I don't need it anymore, my resto is finished.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0297137739 Hope this helps Lockie
|
|
| Author: | Kennomini [ Thu Jan 01, 2009 4:30 pm ] |
| Post subject: | |
My van shell is sitting on a trolley with height adjustable legs. The trolley is the size of the floorpan (935x1350 with 500mm long legs) It's made out off 2 inch box section and has a caster wheel on the bottom of each leg (2 have brakes).  
|
|
| Author: | Dylans Clubby [ Fri Jan 02, 2009 12:46 pm ] |
| Post subject: | |
wow you're actually doing something with your moke???  !!!
how about you come prepared to work with some measurements and an idea of what you want to do you silly boy 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|