| ausmini https://www.ausmini.com/forums/ |
|
| bearings https://www.ausmini.com/forums/viewtopic.php?f=2&t=49176 |
Page 1 of 1 |
| Author: | dale 62 [ Mon Jan 12, 2009 6:21 pm ] |
| Post subject: | bearings |
just wondering on metro turbo brakes do you need the inner oil seal spacer because i dont think the kit came with one only inner and outer seals and a bearing water shield |
|
| Author: | drmini in aust [ Mon Jan 12, 2009 6:34 pm ] |
| Post subject: | |
Timken bearings have a wide spacer there (about 5mm wide). Ball bearings have a thin one, about 2? mm wide. The spacers don't come in the bearing kit, either find some or do without, if so just fit inner seal until barely flush. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|