| ausmini https://www.ausmini.com/forums/ |
|
| Morris 1100 wheel base https://www.ausmini.com/forums/viewtopic.php?f=2&t=49292 |
Page 1 of 1 |
| Author: | Spotty [ Fri Jan 16, 2009 6:10 pm ] |
| Post subject: | Morris 1100 wheel base |
Can anyone tell me the length and width of the wheel base i.e. outer edge of tyres width and length on a Morris 1100?, just wheel base not entire body. Need to check to see if it will fit on my trailer or if i need to hire one. Thanks |
|
| Author: | Morris 1100 [ Fri Jan 16, 2009 6:17 pm ] |
| Post subject: | Re: Morris 1100 wheel base |
Spotty wrote: Can anyone tell me the length and width of the wheel base i.e. outer edge of tyres width and length on a Morris 1100?, just wheel base not entire body. Need to check to see if it will fit on my trailer or if i need to hire one. Thanks Back in a minute....
|
|
| Author: | mattsmadmini [ Fri Jan 16, 2009 6:20 pm ] |
| Post subject: | |
|
|
|
| Author: | Morris 1100 [ Fri Jan 16, 2009 6:28 pm ] |
| Post subject: | |
The width across the tyres is 4'9½" or 1.46m. But you need to allow a touch more to clear the wheel centres as they stick out a little from the tyre. The wheelbase is 7'9½" or 2.375m. You need to allow more space for the tyre to sit on. You are not picking up a Morris 1100 from Bargo are you?
|
|
| Author: | Spotty [ Fri Jan 16, 2009 6:31 pm ] |
| Post subject: | |
Morris 1100 wrote: The width across the tyres is 4'9½" or 1.46m. But you need to allow a touch more to clear the wheel centres as they stick out a little from the tyre.
The wheelbase is 7'9½" or 2.375m. You need to allow more space for the tyre to sit on. You are not picking up a Morris 1100 from Bargo are you? Thanks for measuring and yes I am off to Bargo next weekend. |
|
| Author: | mattsmadmini [ Fri Jan 16, 2009 6:32 pm ] |
| Post subject: | |
ooooooo thems fightin words!
|
|
| Author: | Morris 1100 [ Fri Jan 16, 2009 6:39 pm ] |
| Post subject: | |
I should have bid higher.
|
|
| Author: | Spotty [ Fri Jan 16, 2009 6:43 pm ] |
| Post subject: | |
Probably, if you knew what I was going to do to it. Its one of 2 I have bought in the last 2 weeks. |
|
| Author: | Morris 1100 [ Fri Jan 16, 2009 6:48 pm ] |
| Post subject: | |
Did you want the whole car or just the motor? |
|
| Author: | Spotty [ Fri Jan 16, 2009 7:05 pm ] |
| Post subject: | |
Nope just poaching the motor & box out of that one. |
|
| Author: | Morris 1100 [ Fri Jan 16, 2009 7:06 pm ] |
| Post subject: | |
Spotty wrote: Nope just poaching the motor & box out of that one. I could pull the motor and box for you and you can leave the car with me. 
|
|
| Author: | AJ [ Fri Jan 16, 2009 7:37 pm ] |
| Post subject: | |
Oh ......another 1100S deceased , pity 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|