ausmini
https://www.ausmini.com/forums/

Clubman Door Mirrors
https://www.ausmini.com/forums/viewtopic.php?f=2&t=49359		 Page 1 of 1
Author:  GrahamA [ Sun Jan 18, 2009 8:45 pm ]
Post subject:  Clubman Door Mirrors
Hello,
the Clubman mirrors are quite shaky, but I can't seem to see how to tighten them up.
I was inside the door trim securing a loose door lock and tried to "feel" up inside the door to see how the mirrors are attached, but came up short - I couldn't figure it at all.
To me it seems there is a secure base plate with the mirrors somehow attached... but I have no idea and it bugs me.
Image

Anyone able to set me straight - or point me in direction of new/better mirrors :D
thanks
Graham
Author:  Morris 1100 [ Sun Jan 18, 2009 8:49 pm ]
Post subject: 
Take a look at the back of the spring loaded arm where it meets the body. If you look carefully you will find a screw facing forwards. Loosten this screw and the body will come off the mount.
Then tighten up the mount and re-fit the body.

Hang on I will take a photo...
Author:  Morris 1100 [ Sun Jan 18, 2009 9:06 pm ]
Post subject: 
Here is the screw....
Image

This is what the mount looks like...
Image

Here is a screwdriver on the screw...
Image
Author:  GrahamA [ Sun Jan 18, 2009 9:15 pm ]
Post subject:  mirrors - fixed
Hi

Thanks - I went and checked
A bit tricky to find "exactly" the right screwdriver, but with that done it was exactly as described and as easy as.
Two snug mirrors now :D :D

Graham
Author:  Morris 1100 [ Sun Jan 18, 2009 9:16 pm ]
Post subject: 
The trick it that the arms have to be on the right angle to allow the screwdriver in.
I am glad it worked. The really are great mirrors and they look right.
Author:  mattsmadmini [ Sun Jan 18, 2009 9:25 pm ]
Post subject: 
if you get bored of them ill have it :lol:
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/