Karcraft sells a 7.5" Cooper S disc conversion kit from drums for $1,490 all up.
| ausmini https://www.ausmini.com/forums/ |
|
| suspension and brake overhaul https://www.ausmini.com/forums/viewtopic.php?f=2&t=49538 |
Page 1 of 1 |
| Author: | redrocketrider [ Sat Jan 24, 2009 1:45 pm ] |
| Post subject: | suspension and brake overhaul |
Hey everyone Im looking at getting all new suspension and was wondering what people thought of these 2 kits? http://www.minisport.com/acatalog/info_SUSKIT3.html http://www.minisport.com/acatalog/info_SUSCKIT04.html. is this all ill need to replace everything. also looking at converting too disks, anyone know of a stright bolt on kit I can get, thanks, Rick |
|
| Author: | rampage101 [ Sat Jan 24, 2009 2:53 pm ] |
| Post subject: | |
You could also check here, hey have kits: http://www.minisport.com.au/category2_3.htm |
|
| Author: | drmini in aust [ Sat Jan 24, 2009 2:58 pm ] |
| Post subject: | |
Karcraft sells a 7.5" Cooper S disc conversion kit from drums for $1,490 all up.
|
|
| Author: | redrocketrider [ Sat Jan 24, 2009 2:58 pm ] |
| Post subject: | |
thanks rampage, I use the minisport guys all the time, but its a huge price difference right now. and Im trying too save as much as possible, right now I want too know if the kits im looking at are all i will need |
|
| Author: | floss [ Sat Jan 24, 2009 3:28 pm ] |
| Post subject: | |
http://www.minisport.com/acatalog/info_SUSCKIT04.html. This link does not work. I would have thought you would want to replace the donuts as well. They get knackered with age and the rubber deteriorates. I had good ones in the back so moved them to the front and then got some rover ones second hand from brickworks. They are in great condition and really cheap as used. |
|
| Author: | redrocketrider [ Sat Jan 24, 2009 3:34 pm ] |
| Post subject: | |
i was wondering if that kit came with the rubber cones, guess not eh |
|
| Author: | redrocketrider [ Sat Jan 24, 2009 3:40 pm ] |
| Post subject: | |
http://www.minisport.com.au/prod323.htm would this be a better idea |
|
| Author: | floss [ Sat Jan 24, 2009 3:41 pm ] |
| Post subject: | |
out of my league there buddy. I don't know anything about them so will leave comment for the experts |
|
| Author: | redrocketrider [ Sat Jan 24, 2009 3:45 pm ] |
| Post subject: | |
how about a full bolt on disk brake set up |
|
| Author: | drmini in aust [ Sat Jan 24, 2009 3:51 pm ] |
| Post subject: | |
redrocketrider wrote: how about a full bolt on disk brake set up
That Karcraft price above IS for a full bolt-on disc setup. All you keep are the old driveshafts... Pretty cheap really, some people here have bought old 7.5" disc setups and reconditioned them, it cost them more than this. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|