A Moke floor is nothing like a Mini floor. (just like a Moke bonnet is nothing like a Mini bonnet
)
| ausmini https://www.ausmini.com/forums/ |
|
| moke floor pans https://www.ausmini.com/forums/viewtopic.php?f=2&t=49715 |
Page 1 of 2 |
| Author: | kiwiinwgtn [ Thu Jan 29, 2009 6:17 pm ] |
| Post subject: | moke floor pans |
I was wondering is a mini Moke floor pan the same as a Mini Thanks Kiwiinwgtn |
|
| Author: | mattsmadmini [ Thu Jan 29, 2009 6:18 pm ] |
| Post subject: | |
no |
|
| Author: | Wombat [ Thu Jan 29, 2009 6:21 pm ] |
| Post subject: | |
Moke floor pans are usually in worse condition than Minis - if not you could get a good price for them |
|
| Author: | Tombo [ Thu Jan 29, 2009 6:24 pm ] |
| Post subject: | |
Longer like a van maybe? |
|
| Author: | Morris 1100 [ Thu Jan 29, 2009 6:28 pm ] |
| Post subject: | |
A Moke floor is nothing like a Mini floor. (just like a Moke bonnet is nothing like a Mini bonnet )
|
|
| Author: | kiwiinwgtn [ Thu Jan 29, 2009 7:43 pm ] |
| Post subject: | |
so whats the difference |
|
| Author: | Blokeinamoke [ Thu Jan 29, 2009 7:52 pm ] |
| Post subject: | |
everything - completely different dimensions |
|
| Author: | mattsmadmini [ Thu Jan 29, 2009 7:52 pm ] |
| Post subject: | |
mokes are very cool and square... and as BIAM said... completely different shape... new moke panels can be bought (very exxy though...) |
|
| Author: | Leighton [ Thu Jan 29, 2009 7:53 pm ] |
| Post subject: | |
have a look at these: moke: 
and mini: 
about a foot of difference |
|
| Author: | Blokeinamoke [ Thu Jan 29, 2009 8:10 pm ] |
| Post subject: | |
Leighton wrote: about a foot of difference
and here it is 
|
|
| Author: | Leighton [ Thu Jan 29, 2009 8:13 pm ] |
| Post subject: | |
|
|
| Author: | kiwiinwgtn [ Thu Jan 29, 2009 8:14 pm ] |
| Post subject: | |
thanks trying to convince the wife to let me buy a moke but its had a very rough repair to the floor hence the questions I think she would divorce me if i brought another project TA Kiwiinwgtn[/img][/url] |
|
| Author: | Blokeinamoke [ Thu Jan 29, 2009 8:19 pm ] |
| Post subject: | |
kiwiinwgtn wrote: thanks
trying to convince the wife to let me buy a moke but its had a very rough repair to the floor hence the questions I think she would divorce me if i brought another project TA Kiwiinwgtn[/img][/url] they all have - most have had new panels fabricated |
|
| Author: | clubmn [ Thu Jan 29, 2009 8:20 pm ] |
| Post subject: | jay |
many people weld just flat floors in mokes.... Not my prefrence by anymeans but makes for an easy repair.... otherwise if your creases are ok, its not that hard to weld in sections.. But keep in mind its allways worse than you anticipate. |
|
| Author: | drmini in aust [ Thu Jan 29, 2009 8:23 pm ] |
| Post subject: | |
Mine isn't bad in the floor but I had to fold up two 70 deg angle sections to fix the sides of the tub, in to the 1st floor crease. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|