ausmini
https://www.ausmini.com/forums/

This will make you cringe
https://www.ausmini.com/forums/viewtopic.php?f=2&t=4972		 Page 1 of 2
Author:  ozmotorsport [ Mon Feb 21, 2005 8:54 pm ]
Post subject:  This will make you cringe
THe good thing about being a useless mechanic like me is that when you do some work on your mini you dont have that little voice telling you "Hey, that's not the right tool for the job".

I do with what I have, LOL.

Image
Author:  willy [ Mon Feb 21, 2005 8:58 pm ]
Post subject: 
YES!
:) Thats the shot bud.
Its pretty hard to round off a head like that, anyway.
Go the shifters!
Author:  Marvin [ Mon Feb 21, 2005 9:06 pm ]
Post subject: 
Personally I think it's too small :!: :D
Author:  poeee [ Mon Feb 21, 2005 9:09 pm ]
Post subject: 
I can just hear my father yelling at me for using a shifter! But... it's more than likely we got the right tool. :lol:
Author:  Wombat [ Mon Feb 21, 2005 9:12 pm ]
Post subject: 
Brings to mind some advice I got when I first bought the Land Cruiser and planning a trip up to Birdsville. I was complaining to an engineer customer that the car was metric and all my tools I had accumulated to that point were imperial. He looked at me with a dead straight face and said "just buy yourself a Metric Shifter" :P
Author:  poeee [ Mon Feb 21, 2005 9:13 pm ]
Post subject: 
Metric shifter, ahahahahahaha :lol: :lol: :lol: :lol: :lol:

Ya shoulda offered to swap your imperial shifter with his metric shifter.
Author:  J_A_M [ Mon Feb 21, 2005 9:17 pm ]
Post subject: 
you should be using a right hand shifter on that one OZ..... :wink:
Author:  68matic [ Mon Feb 21, 2005 9:20 pm ]
Post subject: 
chris yes i cringed

blue handled screw driver ughck
Author:  willy [ Mon Feb 21, 2005 9:21 pm ]
Post subject: 
Go the green handled Stanley jobs.

Hardie Spicers yeah?
Nice.
Author:  ozmotorsport [ Mon Feb 21, 2005 9:32 pm ]
Post subject: 
I have a collection f them, all diffirent sizes. THis one is my favourite because a) I found it and b) it has it's very own tool box.

You know I once undid a stuborn sump plug with that. Wish I had taken a photo of that one.
Author:  drmini in aust [ Mon Feb 21, 2005 9:37 pm ]
Post subject: 
I'm cringing, because I built it. No, I didn't use a shifter & a screwdriver.. :shock:
Author:  cush [ Mon Feb 21, 2005 9:48 pm ]
Post subject: 
sorry about the diversion but what the hell is a ginger king?

this is all i can think of...

Image

oh.. back on topic(ish)

oz, with that shifter, you must have HUGE nuts

:wink:
Author:  willy [ Mon Feb 21, 2005 9:54 pm ]
Post subject: 
The SHERMINATOR.

I love mothers.

a 800mm shifter does big nuts too.
Author:  supercharged 850 [ Tue Feb 22, 2005 1:05 am ]
Post subject: 
Sometimes you just gotta do it. :lol:

BUT
I think you should invest in these.....

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&category=20774&item=4359061994&rd=1

I've got a set of these, and a set of impact ones too :wink:
Author:  ozmotorsport [ Tue Feb 22, 2005 7:20 am ]
Post subject: 
I agree. I just spent $$$$ buying a whole set of inperial sockets and spanners as I only ever had metric. Maybe in the future. For now I will just borrow Garry's stuff and use my giant shifter.
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/