How wide are wide steelies!??!??!
Mini i have done a deal on has them fitted with some wide'ish arches, now pondering weather to go with them or go with jellybeans(have in waiting) and shrink the arches as the need replacing!?
cheers people!
| ausmini https://www.ausmini.com/forums/ |
|
| how wide....... https://www.ausmini.com/forums/viewtopic.php?f=2&t=49762 |
Page 1 of 1 |
| Author: | Blunder [ Fri Jan 30, 2009 9:52 pm ] |
| Post subject: | how wide....... |
How wide are wide steelies!??!??! Mini i have done a deal on has them fitted with some wide'ish arches, now pondering weather to go with them or go with jellybeans(have in waiting) and shrink the arches as the need replacing!? cheers people!
|
|
| Author: | simon k [ Fri Jan 30, 2009 10:21 pm ] |
| Post subject: | |
depends on who made them, and how they made them... some are just 3.5" rims turned around so they're wide, some have a band welded into them, all made by various companies, back yarders and everyone inbetween from original 3.5" rims with no real consistency unless they're Cooper S style ones with LP918 stamped on one of the hubcap lugs, in which case they're 4.5", but I doubt it... |
|
| Author: | Blunder [ Fri Jan 30, 2009 10:33 pm ] |
| Post subject: | |
they look like these!!?? http://cgi.ebay.com.au/MINI-MAGS-10-INCH_W0QQitemZ180324507184QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item180324507184&_trksid=p3911.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318 Are they mags!? |
|
| Author: | Tombo [ Fri Jan 30, 2009 11:49 pm ] |
| Post subject: | |
To know how wide, measure between the rim edges where the tyre seals, not the very outer edge, go to the nearest 1/2 inch. Steel rims can be from 3.5 to 7 inch + |
|
| Author: | clubmn [ Sat Jan 31, 2009 1:58 pm ] |
| Post subject: | |
here is a picture of the wheels on my car.... 10x7" and as you can see very offset origionaly cooper S rims, i will be taking these off really soon as i picked up a set of 3 piece contessas 10x7 aswell.... b 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|