ausmini https://www.ausmini.com/forums/ |
|
My Wifes Mini Hates Me https://www.ausmini.com/forums/viewtopic.php?f=2&t=49832 |
Page 1 of 1 |
Author: | gafmo [ Sun Feb 01, 2009 7:05 pm ] |
Post subject: | My Wifes Mini Hates Me |
I was kind and caring for my wifes Daily Drive and changed the oil and new filter on it. Wife also said sounded funny so I checke the Dashpot and it was low in oil also. ...So it start to Hunt ![]() While I was at it I also changed the Remote shift Rubber Bracket. The three bolts specialy one of them was not playing my ball game. Finaly got it in place and took it for a spin around the block and it brakes again Flange gasket is gone on the extractors also and I'v never had any joy with the electronics ![]() on the list I think some thing else is wrong some where with the elgine mounts or steadies for the Remote rubber and Brackets to be a rite sod New Gasket for the extractors and a New pipe back to the Muffler Stopped the Hunting by richening up the mixture End of Rant ![]() Cheers also Kev ![]() |
Author: | drmini in aust [ Sun Feb 01, 2009 7:14 pm ] |
Post subject: | |
That mount I sold you is a Quinton Hazell, probably the best available here now (yeah I know Mackay Rubber Oz ones were good but are they still about...) Was there any gap between the mount and the tunnel bracket after the remote went back in? It has to be hard against the bracket, so that the mount is `in shear'- if any gap is there they just rip off the plate. |
Author: | gafmo [ Sun Feb 01, 2009 7:21 pm ] |
Post subject: | |
mount was bolted to the Remote then the bracket to the mount then the bracket bolt up. Something else is out somewhere. Not touching it tonight Sue can just put up with it for a week or two not that she ever noticed it anyway ![]() |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |