| ausmini https://www.ausmini.com/forums/ |
|
| how much? https://www.ausmini.com/forums/viewtopic.php?f=2&t=49869 |
Page 1 of 1 |
| Author: | carter [ Mon Feb 02, 2009 7:46 pm ] |
| Post subject: | how much? |
how much is a mk 1 cooper s head worth that needs reco? also a mk 1 s motor and g/box that need reco? |
|
| Author: | slinkey inc [ Mon Feb 02, 2009 8:37 pm ] |
| Post subject: | |
As for the head, it depends on what it has, ie is it complete? or how complete? It also depends on the condition. Does it have any cracks? You won't know this until it is crack tested obviously so remember this. As for motor and gearbox, same stuff applies. Since you are talking head, motor and gearbox I'd assume its pretty complete. |
|
| Author: | Harley [ Mon Feb 02, 2009 9:02 pm ] |
| Post subject: | |
It's probably worth somewhere between a "fwoaaaaar" and an eyebrow raised whistle. Then again if the reco work is minimal it could be worth a thumbs up. I know a lot of people who have cooper s stuff they claim is worth *rubs thumb on ndex finger* but to me that amount is just laughable. I love 'how much' threads. You never know how much crap answers you'll get! 
|
|
| Author: | Bubbacluby [ Mon Feb 02, 2009 9:06 pm ] |
| Post subject: | |
motor and gearbox suitable for recondition - mk2 S box is under mk1 block, so condition not known, but when last driven felt ok, did a bearing or something - got a funny noise in it so got it home and replaced it with another motor he had. Head is not cracked and needs a full overhaul, is complete though (Carter is my brother hence why i know  )
Brenton |
|
| Author: | 850man [ Mon Feb 02, 2009 9:07 pm ] |
| Post subject: | |
There only worth as much as someone is willing to pay. saying that they S engine parts are getting very hard to get these days so if its the part that is needed to finish a resto then people will pay a fortune. Ebay is a classic example. |
|
| Author: | doogie [ Mon Feb 02, 2009 9:56 pm ] |
| Post subject: | |
How long is a peice of string? MK1 AEG163 heads are prone to cracking, so check it throughly As for the motor, unless you know it's history you never know, could have a busted crank, scored bore anything, but you have to get what you can these days. I have a fully recoed MK1 head owes me nearly $1000 Also a fully rebuilt MK1 short motor owes me nearly $2000 The above prices don't include buying the motor & head Hope it helps Doogie |
|
| Author: | 9YaTaH [ Tue Feb 03, 2009 6:14 am ] |
| Post subject: | Re: how much? |
carter wrote: how much is a mk 1 cooper s head worth that needs reco? also a mk 1 s motor and g/box that need reco?
Say anywhere from 0-500 for the head... Say 0-2000 for a motor and gearbox that needs reco You can be lucky and find them on the tip or in backyards!! |
|
| Author: | Blokeinamoke [ Tue Feb 03, 2009 7:24 am ] |
| Post subject: | |
Easy - less than you expect and more than anybody is prepared to pay |
|
| Author: | carter [ Tue Feb 03, 2009 8:36 am ] |
| Post subject: | |
well the price that has been set for me if i want them is $1200 thats head g/box block theey are all basically complete. so im guessing that this is a pretty good price? |
|
| Author: | slinkey inc [ Tue Feb 03, 2009 6:32 pm ] |
| Post subject: | |
I'd probably buy it at that. It is a risk, but these things are rear these days. I recently paid abit more than that for a unknown 1275 (was 1100S block, late S head and GT gearbox). Apparantly it goes hard but you can't say 'till you strip, rebuild then drive it. It does have flat top pistons though which is odd for a 1275 I think and a slightly ported head. It also came with a lot of front end parts (engine was in a subframe). Hence the larger price I guess. |
|
| Author: | drmini in aust [ Tue Feb 03, 2009 7:33 pm ] |
| Post subject: | |
I'd say $1200 is a good price unless something is bad inside (eg. crank cracked). You could part it out and get more than that. 
|
|
| Author: | simon k [ Tue Feb 03, 2009 7:37 pm ] |
| Post subject: | |
yep... $1200 is a bargain |
|
| Author: | slinkey inc [ Tue Feb 03, 2009 9:26 pm ] |
| Post subject: | |
The jury has spoken...... Go for it! You know you want to!
|
|
| Author: | carter [ Wed Feb 04, 2009 9:00 am ] |
| Post subject: | |
righto thanks a lot fellas for all ya help and advise. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|