ausmini
https://www.ausmini.com/forums/

sorry everyone, but i`m outa here
https://www.ausmini.com/forums/viewtopic.php?f=2&t=49887		 Page 1 of 3
Author:  TheMiniMan [ Tue Feb 03, 2009 10:41 am ]
Post subject:  sorry everyone, but i`m outa here
this place has taken me too far

sorry but Aaron & pristic can`t read,,, maybe you lot need glasses

bye
Author:  Blokeinamoke [ Tue Feb 03, 2009 10:42 am ]
Post subject: 
Thanks its been fun - come back when it doesnt matter so much
Author:  awdmoke [ Tue Feb 03, 2009 10:47 am ]
Post subject: 
It doesn't matter now :?

See you around once you've cooled off Matt
Author:  poeee [ Tue Feb 03, 2009 11:00 am ]
Post subject: 
Matt, you know we all love you. Don't let a simple miscommunication coupled with a few people who are incredibly passionate (you included) make you call it a day.

You know that’s why there are these heated words, it’s cause everyone here is passionate about the same interest.
Author:  Hanra [ Tue Feb 03, 2009 11:53 am ]
Post subject: 
Have I missed something? Shame to loose such a knowledgeable and helpful member.
Author:  Bubbacluby [ Tue Feb 03, 2009 11:54 am ]
Post subject: 
Bye Matt..

Your technical advice will be missed.

But come back when when the steam has blown away
Author:  pristic [ Tue Feb 03, 2009 11:56 am ]
Post subject: 
Dont want you to leave, but if you want to go - go... bye

Don't blame me though! If we all ran when there were questions, etc none of us would be here.

I really dont think I had any influence in you leaving mate - if I did - sorry had no intention of doing so.

And I can read, you just cant type - <--joking - everyone needs to settle down FFS!!

PM me what your angry with me about, or ill calll you lots and lots and harass you.

Pete
Author:  Bubbacluby [ Tue Feb 03, 2009 12:01 pm ]
Post subject: 
Hanra wrote:
Have I missed something? Shame to loose such a knowledgeable and helpful member.


read mini "a and a+ series modifactions" forum and i think it is the head topic (its concerning twinky head conversion), i think it is basically repeated in a couple of topics
Author:  Hanra [ Tue Feb 03, 2009 12:40 pm ]
Post subject: 
Hmmmm, yeah i just read every page. What a shame....
Author:  aaron [ Tue Feb 03, 2009 12:43 pm ]
Post subject: 
1stly Don't blame me for leaving, it was not the intention. Anyone who thinks I or peter drove Matt away should think again.We only wanted information of which Matt has kindly informed us that he is going to Supply when he has the time. Cheers Matt.

Bye Matt, see you back when you have some info so you can show me the goods, of which i hope you do. I can Wait patiently. Oh by the Way I had a loverly Conversation with GR who explained a whole heap of information and has some very good documentation that he is going to supply me. Also spoke to a bloke from BMW about the K1 heads, very helpful too.
When your feeling better I will look forward to seeing you about, and i hope your Kombi Diff holds out, but thats what you get for running a VW..... :lol: Kidding.

Come back soon
Author:  simon k [ Tue Feb 03, 2009 2:48 pm ]
Post subject: 
my 2 cents... Aaron and Peter weren't being fair
Author:  feralsprint [ Tue Feb 03, 2009 2:53 pm ]
Post subject: 
Simon
inflation mate it now costs 5c
Author:  simon k [ Tue Feb 03, 2009 2:55 pm ]
Post subject: 
feralsprint wrote:
Simon
inflation mate it now costs 5c


not now that we've got a 1% interest rate cut
Author:  TheMiniMan [ Tue Feb 03, 2009 2:59 pm ]
Post subject: 
Quote from page 2,,, yes,,, page 2,,, can you read that or would you like me tomake the print larger???---> that means it was typed very early in the first thread about this

"""""Doc,,, they make 90hp on a 1000cc engine ,,, & 100hp on an 1100cc

I`ve not seen very many 100hp 1100cc minis driving around the streets hey???

& definately no-where-near as smoooooooooooth as silk like a Bimmer is

I`ll post the dyno figures when i get around to finishing off all the twinky engines/cars that i`m building.

If you can`t wait then keep an eye on the guys in England, they`re about to have their Bimmer Twinky Dyno day early feb,,, should be very interesting """""""""""


sorry but this questioning went around & around & a round & feralsprint added his info which is very well informed i might add,,, I had said in a number of posts that i have a complete running engine , now turbo charged & it`s in a moke right here "nearly finished",,, i`ve also said on quite a number of occasions that i have a small bore engine ready to throw together & as soon as it`s done i will dyno it,,, i have said on many occasions that i`ve had other dramas including my health & kombi breakages etc,,, i have said all this,,, but i still get people like Aaron & Pristic typing things like

"""Why won`t u do it""""

any wonder i`m dirty????????????????!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If i wasn`t going to do it then i would have said ... NO i`m not going to do it,,, but guess what ??? i reckon you`d have missed that too

i don`t like having to yell to get the point across & Aaron i thank you for your appology about missing that last statement on the bimmer thread,,, but my point all along here is that the same statement was made back early in page 2 of the head thread

do you all want me to type it all over again in large capital letters in bolt text so that you actaully can read what i type??????????????

I don`t type diddly squat on MM board now days because of this exact same thing & nor do many other very knowledgable mini experienced people & that`s a very very big shame,,,, simply because we get hounded by this sort of rubbish ,,, & yes that`s half the reason why GR doesn`t type here or Dave Perko doesn`t get involved much ( & yet he`s one of the most able & pedantic , almost anal, mini mechanics/engineers on this board),,, because we are confronted with back & forth crap about stuff that`s common knowledge all around the world,,, & i`m sorry if you only surf here,,, that`s not my fault,,, I thought that`s what the net was all about....... i gave you the info & the places to look, gave you names & businesses,,, Feralsporint gave you the info but you knocked it back because you didn`t want to here or believe what the phoms suggest,,, but then you go """AHHHHH now we have some info on flow figures"""""""" & you Accept them !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

What is with that???????????????????????????????????????

No you don`t want pohmy figures ,,,, but the next breath you accept them

you believe everything that GR says,, so everyone else is speaking rubbish yeah?????

How long do you think i`ve been working on minis,,, racing minis,,, dealing in mini parts... living, eating, breathing minis my whole life from a baby,,, almost born in a mini van for crikeys sake............ Actually Lived in the workshop my whole life ,,, yes that was my home!!!!!!!!!!!!!!

I`m annoyed,,, yes very!!!! sorry but the info is all around you but you just pester & pester me after i`ve already said i have a few on the go & when they`re done i`ll post results

I`ve spent years on this thing & have heaps of them being built,,,, i wish i had a team of me`s running around doing it all for me but there just isn`t,,, there`s just one of me & i have other stuff happening

i`ve said it over & over & if you don`t like my attitude now then i`m am sorry

& i do accept both your appologys,,, thank you for them ,,, but it still doesnt calm me down,,, altho pristic`s latest comments were pretty funny :-)

the steaming sh!t one was too :-)

get off my back , stop typing the crappy "i want i want i want" stuff,,, wait till they`re done & you`ll have your results.
Author:  aaron [ Tue Feb 03, 2009 3:00 pm ]
Post subject: 
I don't have an opinion so i can even ask for 1 cent. Still after data or an "experts" way of comparing things so i can make an opinion..... then my opinion, being a "layman" will be worth less than half a cent....
I like girls opinions the best :lol:
Page 1 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/