ausmini
https://www.ausmini.com/forums/

front wheel hubs
https://www.ausmini.com/forums/viewtopic.php?f=2&t=50078
Page 1 of 1

Author:  niffty64 [ Sun Feb 08, 2009 12:03 pm ]
Post subject:  front wheel hubs

Could not find a topic on this. is the only difference between left and right hand front hub the position of the grease nipple hole?

Author:  Harley [ Sun Feb 08, 2009 12:25 pm ]
Post subject: 

One of the balljoints had a spring under it too.
Therefore, there is a LH and RH version.

Author:  drmini in aust [ Sun Feb 08, 2009 2:54 pm ]
Post subject: 

The shape of the inside around where the CV goes is handed.
And on disc brake ones the mounting lugs for the calipers are handed too (ie both at front).

Author:  mini-dunger [ Sun Feb 08, 2009 3:39 pm ]
Post subject: 

drmini in aust wrote:
The shape of the inside around where the CV goes is handed.
And on disc brake ones the mounting lugs for the calipers are handed too (ie both at front).


yet I still put my calipers on the wrong way... :?

Author:  Harley [ Sun Feb 08, 2009 4:57 pm ]
Post subject: 

mini-dunger wrote:
yet I still put my calipers on the wrong way... :?


Steering arms go on top.
:D

Author:  Morris 1100 [ Sun Feb 08, 2009 5:04 pm ]
Post subject: 

The wheel studs point out. 8)

Author:  justfanginaround [ Sun Feb 08, 2009 5:27 pm ]
Post subject: 

ball joints at 12 and 6 not 9 and 3

Author:  niffty64 [ Sun Feb 08, 2009 8:48 pm ]
Post subject: 

http://photos-h.ll.facebook.com/photos- ... 5_2898.jpg
stripped both down including steering arms and got mixed up when cleaning up and painting. unpainted one pivot mount stripped. will need a new hub any help on what hand?

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/