| ausmini https://www.ausmini.com/forums/ |
|
| what type https://www.ausmini.com/forums/viewtopic.php?f=2&t=50284 |
Page 1 of 1 |
| Author: | carter [ Sat Feb 14, 2009 4:59 pm ] |
| Post subject: | what type |
what type of coil does a mini take and how to you tell if it is a resistant or non resistant? thanks a lot |
|
| Author: | TheMiniMan [ Sat Feb 14, 2009 5:38 pm ] |
| Post subject: | |
any std 12v coil will do the job,,, resisted ones usually say on the bum of them "use with resistor" ,,, if you`re suss, then ask whoever/whatever shop you buy the coil from to make sure |
|
| Author: | Mick [ Sat Feb 14, 2009 6:02 pm ] |
| Post subject: | |
The Bosch ones for instance have an R in the part number. A normal coil is a SU12 and a resistor type coil is SU12R |
|
| Author: | drmini in aust [ Sat Feb 14, 2009 6:04 pm ] |
| Post subject: | |
Mick wrote: The Bosch ones for instance have an R in the part number.
A normal coil is a SU12 and a resistor type coil is SU12R ... and the Bosch sports coils are GT40 and GT40-R. |
|
| Author: | carter [ Sat Feb 14, 2009 6:13 pm ] |
| Post subject: | |
ok thanks guys |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|