What is the main problem with fitting Rover door cards to oz mini's!?

ps. i'm going to have removed door pockets!

thanks

_________________
New from the UK and wanting a NICE little British car!

Location of window winders and door openers are different , possibly even the size and shape of the rover door cards compared to Australian ones .

_________________

door pockets!

and yeah as mentioned the winder, door opener and lock are in different locations.

The front cards are not very good for Aus Minis. But it is possible if the door pockets are removed the card could be modified to fit. You'll need to cpver up the old winder and opener holes as they will be in the wrong spot. You may even need to trim the size of the whole thing down.

The rear cards are a better story, they do fit. But there is a gap at the door pillar due to different shape Rover doors. I fixed that by making an aluminium strip for each side that fills the gap and covering it in black vinyl. Also doubles as a moethod of securing the the card better as mine didn't like to 'stay' and kept falling out until I put this in.

_________________
1964 Morris 850, 1330 Supercharged - 81.8hp atws.
1975 Leyland Mini S 1100S powered - Nice and reliable.
1977 Leyland Mini LS - Project LS-T